NXMM Publications

Recent publications are listed below. For an extensive overview we kindly refer you to our publication repository DORA.

  • Chen M, Simonelli M, Van Petegem S, Tse YY, Chang CST, Makowska MG, et al.
    A quantitative study of thermal cycling along the build direction of Ti-6Al-4V produced by laser powder bed fusion
    Materials and Design. 2023; 225: 111458 (11 pp.). https://doi.org/10.1016/j.matdes.2022.111458
    DORA PSI
  • Godard P, Verezhak M, Sadat T, Mignerot F, Jacques VLR, Le Bolloc'h D, et al.
    In situ compression of micropillars under coherent X-ray diffraction: a case study of experimental and data-analysis constraints
    Journal of Applied Crystallography. 2023; 56(2): (10 pp.). https://doi.org/10.1107/S1600576723000493
    DORA PSI
  • König H-H, Holländer Pettersson N, Durga A, Van Petegem S, Grolimund D, Chuang AC, et al.
    Solidification modes during additive manufacturing of steel revealed by high-speed X-ray diffraction
    Acta Materialia. 2023; 246: 118713 (11 pp.). https://doi.org/10.1016/j.actamat.2023.118713
    DORA PSI
  • Lo Re G, Engel ER, Björn L, Guizar Sicairos M, Liebi M, Wahlberg J, et al.
    Melt processable cellulose fibres engineered for replacing oil-based thermoplastics
    Chemical Engineering Journal. 2023; 458: 141372 (8 pp.). https://doi.org/10.1016/j.cej.2023.141372
    DORA PSI
  • Silva Barreto I, Pierantoni M, Hammerman M, Törnquist E, Le Cann S, Diaz A, et al.
    Nanoscale characterization of collagen structural responses to in situ loading in rat Achilles tendons
    Matrix Biology. 2023; 115: 32-47. https://doi.org/10.1016/j.matbio.2022.11.006
    DORA PSI
  • Simutis G, Bollhalder A, Zolliker M, Küspert J, Wang Q, Das D, et al.
    In situ uniaxial pressure cell for x-ray and neutron scattering experiments
    Review of Scientific Instruments. 2023; 94: 013906 (7 pp.). https://doi.org/10.1063/5.0114892
    DORA PSI
  • Chen M, Van Petegem S, Zou Z, Simonelli M, Tse YY, Chang CST, et al.
    Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion
    Additive Manufacturing. 2022; 59: 103173 (10 pp.). https://doi.org/10.1016/j.addma.2022.103173
    DORA PSI
  • Ghasemi-Tabasi H, de Formanoir C, Van Petegem S, Jhabvala J, Hocine S, Boillat E, et al.
    Direct observation of crack formation mechanisms with operando laser powder bed fusion X-ray imaging
    Additive Manufacturing. 2022; 51: 102619 (11 pp.). https://doi.org/10.1016/j.addma.2022.102619
    DORA PSI
  • Ghasemi-Tabasi H, Larcher MND, Cayron C, Jhabvala J, Van Petegem S, Kalentics N, et al.
    Understanding variant selection and texture in additively manufactured red-gold alloys
    Scripta Materialia. 2022; 211: 114490 (7 pp.). https://doi.org/10.1016/j.scriptamat.2021.114490
    DORA PSI
  • Glerum JA, Hocine S, Chang CST, Kenel C, Van Petegem S, Casati N, et al.
    Operando X-ray diffraction study of thermal and phase evolution during laser powder bed fusion of Al-Sc-Zr elemental powder blends
    Additive Manufacturing. 2022; 55: 102806 (12 pp.). https://doi.org/10.1016/j.addma.2022.102806
    DORA PSI
  • Härtel M, Illgen C, Panzner T, Bruder E, Schmaltz S, Van Petegem S, et al.
    Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel
    International Journal of Plasticity. 2022; 159: 103478 (19 pp.). https://doi.org/10.1016/j.ijplas.2022.103478
    DORA PSI
  • Pandiyan V, Masinelli G, Claire N, Le-Quang T, Hamidi-Nasab M, de Formanoir C, et al.
    Deep learning-based monitoring of laser powder bed fusion process on variable time-scales using heterogeneous sensing and operando X-ray radiography guidance
    Additive Manufacturing. 2022; 58: 103007 (15 pp.). https://doi.org/10.1016/j.addma.2022.103007
    DORA PSI
  • Pauzon C, Van Petegem S, Hryha E, Chang CST, Hocine S, Van Swygenhoven H, et al.
    Effect of helium as process gas on laser powder bed fusion of Ti-6Al-4V studied with operando diffraction and radiography
    European Journal of Materials. 2022; 2(1): 422-435. https://doi.org/10.1080/26889277.2022.2081622
    DORA PSI
  • Pfeiffer S, Florio K, Makowska M, Marone F, Yüzbasi S, Aneziris CG, et al.
    Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO2-x doped alumina granules
    Journal of the European Ceramic Society. 2022; 42(8): 3515-3529. https://doi.org/10.1016/j.jeurceramsoc.2022.02.046
    DORA PSI
  • Polatidis E, Shukla S, Čapek J, Van Petegem S, Casati N, Mishra RS
    Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction
    Materials Today Communications. 2022; 30: 103155 (9 pp.). https://doi.org/10.1016/j.mtcomm.2022.103155
    DORA PSI
  • Hocine S, Van Swygenhoven H, Van Petegem S
    Verification of selective laser melting heat source models with operando X-ray diffraction data
    Additive Manufacturing. 2021; 37: 101747 (16 pp.). https://doi.org/10.1016/j.addma.2020.101747
    DORA PSI
  • Polatidis E, Haidemenopoulos GN, Krizan D, Aravas N, Panzner T, Šmíd M, et al.
    The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: experimental investigation and modelling the transformation kinetics
    Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2021; 800: 140321 (10 pp.). https://doi.org/10.1016/j.msea.2020.140321
    DORA PSI
  • Samaee V, Dupraz M, Pardoen T, Van Swygenhoven H, Schryvers D, Idrissi H
    Deciphering the interactions between single arm dislocation sources and coherent twin boundary in nickel bi-crystal
    Nature Communications. 2021; 12: 962 (8 pp.). https://doi.org/10.1038/s41467-021-21296-z
    DORA PSI
  • Valsecchi J, Makowska MG, Kim Y, Lee SW, Grünzweig C, Piegsa FM, et al.
    Decomposing magnetic dark-field contrast in spin analyzed Talbot-Lau interferometry: a Stern-Gerlach experiment without spatial beam splitting
    Physical Review Letters. 2021; 126(7): 070401 (7 pp.). https://doi.org/10.1103/PhysRevLett.126.070401
    DORA PSI
  • Verezhak M, Van Petegem S, Rodriguez-Fernandez A, Godard P, Wakonig K, Karpov D, et al.
    X-ray ptychographic topography: a robust nondestructive tool for strain imaging
    Physical Review B. 2021; 103(14): 144107 (9 pp.). https://doi.org/10.1103/PhysRevB.103.144107
    DORA PSI
  • Arabi-Hashemi A, Polatidis E, Smid M, Panzner T, Leinenbach C
    Grain orientation dependence of the forward and reverse fcc ↔ hcp transformation in FeMnSi-based shape memory alloys studied by in situ neutron diffraction
    Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2020; 782: 139261 (11 pp.). https://doi.org/10.1016/j.msea.2020.139261
    DORA PSI
  • Berdiyeva P, Karabanova A, Makowska MG, Johnsen RE, Blanchard D, Hauback BC, et al.
    In-situ neutron imaging study of NH3 absorption and desorption in SrCl2 within a heat storage prototype reactor
    Journal of Energy Storage. 2020; 29: 101388 (9 pp.). https://doi.org/10.1016/j.est.2020.101388
    DORA PSI
  • Garcia-Gonzalez M, Van Petegem S, Baluc N, Dupraz M, Honkimaki V, Lalire F, et al.
    Influence of thermo-mechanical history on the ordering kinetics in 18 carat Au alloys
    Acta Materialia. 2020; 191: 186-197. https://doi.org/10.1016/j.actamat.2020.03.032
    DORA PSI
  • Hocine S, Van Petegem S, Frommherz U, Tinti G, Casati N, Grolimund D, et al.
    A miniaturized selective laser melting device for operando X-ray diffraction studies
    Additive Manufacturing. 2020; 34: 101194 (9 pp.). https://doi.org/10.1016/j.addma.2020.101194
    DORA PSI
  • Hocine S, Van Swygenhoven H, Van Petegem S, Chang CST, Maimaitiyili T, Tinti G, et al.
    Operando X-ray diffraction during laser 3D printing
    Materials Today. 2020; 34: 30-40. https://doi.org/10.1016/j.mattod.2019.10.001
    DORA PSI
  • Konstantinou G, Kakkava E, Hagelüken L, Vallachira Warriam Sasikumar P, Wang J, Makowska MG, et al.
    Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin
    Additive Manufacturing. 2020; 35: 101343 (10 pp.). https://doi.org/10.1016/j.addma.2020.101343
    DORA PSI
  • Maimaitiyili T, Mosur K, Kurzynowski T, Casati N, Van Swygenhoven H
    Phase studies of additively manufactured near beta titanium alloy-Ti55511
    Materials. 2020; 13(7): 1723 (14 pp.). https://doi.org/10.3390/ma13071723
    DORA PSI
  • Makowska M, Sasikumar PVW, Hagelüken L, Ferreira Sanchez D, Casati N, Marone F, et al.
    Cracks, porosity and microstructure of Ti modified polymer-derived SiOC revealed by absorption-, XRD- and XRF-contrast 2D and 3D imaging
    Acta Materialia. 2020; 198: 134-144. https://doi.org/10.1016/j.actamat.2020.07.067
    DORA PSI
  • Maresca F, Polatidis E, Šmíd M, Van Swygenhoven H, Curtin WA
    Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels
    Acta Materialia. 2020; 200: 246-255. https://doi.org/10.1016/j.actamat.2020.08.028
    DORA PSI
  • Morgano M, Kalentics N, Carminati C, Capek J, Makowska M, Woracek R, et al.
    Investigation of the effect of laser shock peening in additively manufactured samples through Bragg edge neutron imaging
    Additive Manufacturing. 2020; 34: 101201 (6 pp.). https://doi.org/10.1016/j.addma.2020.101201
    DORA PSI
  • Pfeiffer S, Makowska M, Kevin Florio, Ferreira Sanchez D, Marone F, Zhang X, et al.
    Selective laser melting of thermal pre-treated METAL oxide doped aluminum oxide granules
    Open Ceramics. 2020; 2: 100007 (14 pp.). https://doi.org/10.1016/j.oceram.2020.100007
    DORA PSI
  • Polatidis E, Šmíd M, Kuběna I, Hsu W-N, Laplanche G, Van Swygenhoven H
    Deformation mechanisms in a superelastic NiTi alloy: an in-situ high resolution digital image correlation study
    Materials and Design. 2020; 191: 108622 (10 pp.). https://doi.org/10.1016/j.matdes.2020.108622
    DORA PSI
  • Polatidis E, Morgano M, Malamud F, Bacak M, Panzner T, Van Swygenhoven H, et al.
    Neutron diffraction and diffraction contrast imaging for mapping the TRIP effect under load path change
    Materials. 2020; 13(6): 1450 (12 pp.). https://doi.org/10.3390/ma13061450
    DORA PSI
  • Samothrakitis S, Raventós M, Čapek J, Buhl Larsen C, Grünzweig C, Tovar M, et al.
    Grain morphology reconstruction of crystalline materials from Laue three-dimensional neutron diffraction tomography
    Scientific Reports. 2020; 10(1): 3724 (7 pp.). https://doi.org/10.1038/s41598-020-60330-w
    DORA PSI
  • Sohrabi N, Jhabvala J, Kurtuldu G, Stoica M, Parrilli A, Berns S, et al.
    Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion
    Materials and Design. 2020; 199: 109400 (14 pp.). https://doi.org/10.1016/j.matdes.2020.109400
    DORA PSI
  • Zhang X, Pfeiffer S, Rutkowski P, Makowska M, Kata D, Yang J, et al.
    Laser cladding of manganese oxide doped aluminum oxide granules on titanium alloy for biomedical applications
    Applied Surface Science. 2020; 520: 146304 (11 pp.). https://doi.org/10.1016/j.apsusc.2020.146304
    DORA PSI
  • Campillo-Robles JM, Goonetilleke D, Soler D, Sharma N, Martín Rodríguez D, Bücherl T, et al.
    Monitoring lead-acid battery function using operando neutron radiography
    Journal of Power Sources. 2019; 438: 226976 (11 pp.). https://doi.org/10.1016/j.jpowsour.2019.226976
    DORA PSI
  • Deillon L, Verheyden S, Ferreira Sanchez D, Van Petegem S, Van Swygenhoven H, Mortensen A
    Laue microdiffraction characterisation of as-cast and tensile deformed Al microwires
    Philosophical Magazine. 2019; 99(15): 1866-1880. https://doi.org/10.1080/14786435.2019.1605220
    DORA PSI
  • Dupraz M, Rao SI, Van Swygenhoven H
    Large scale 3-dimensional atomistic simulations of screw dislocations interacting with coherent twin boundaries in Al, Cu and Ni under uniaxial and multiaxial loading conditions
    Acta Materialia. 2019; 174: 16-28. https://doi.org/10.1016/j.actamat.2019.05.025
    DORA PSI
  • Florio K, Pfeiffer S, Makowska M, Casati N, Verga F, Graule T, et al.
    An innovative selective laser melting process for hematite-doped aluminum oxide
    Advanced Engineering Materials. 2019; 21(6): 1801352 (10 pp.). https://doi.org/10.1002/adem.201801352
    DORA PSI
  • Garcia-Gonzalez M, Van Petegem S, Baluc N, Hocine S, Dupraz M, Lalire F, et al.
    Enhanced precipitate growth at reduced temperatures during chemical ordering in deformed red gold alloys
    Scripta Materialia. 2019; 170: 129-133. https://doi.org/10.1016/j.scriptamat.2019.05.038
    DORA PSI
  • Hsu W-N, Polatidis E, Šmíd M, van Petegem S, Casati N, van Swygenhoven H
    Deformation and degradation of superelastic NiTi under multiaxial loading
    Acta Materialia. 2019; 167: 149-158. https://doi.org/10.1016/j.actamat.2019.01.047
    DORA PSI
  • Kacher J, Kirchlechner C, Michler J, Polatidis E, Schwaiger R, Van Swygenhoven H, et al.
    Impact of in situ nanomechanics on physical metallurgy
    MRS Bulletin. 2019; 44(06): 465-470. https://doi.org/10.1557/mrs.2019.124
    DORA PSI
  • Maimaitiyili T, Woracek R, Neikter M, Boin M, Wimpory RC, Pederson R, et al.
    Residual lattice strain and phase distribution in Ti-6Al-4V produced by electron beam melting
    Materials. 2019; 12(4): 667 (20 pp.). https://doi.org/10.3390/ma12040667
    DORA PSI
  • Makowska M, Pfeiffer S, Casati N, Florio K, Vetterli M, Wegener K, et al.
    Pre-processing of hematite-doped alumina granules for Selective Laser Melting
    Ceramics International. 2019; 45(14): 17014-17022. https://doi.org/10.1016/j.ceramint.2019.05.251
    DORA PSI
  • Pfeiffer S, Florio K, Makowska M, Ferreira Sanchez D, Van Swygenhoven H, Aneziris CG, et al.
    Iron oxide doped spray dried aluminum oxide granules for selective laser sintering and melting of ceramic parts
    Advanced Engineering Materials. 2019; 21(6): 1801351. https://doi.org/10.1002/adem.201801351
    DORA PSI
  • Polatidis E, Sofinowski K, Hsu W-N, Van Swygenhoven H
    Following microstructures during deformation: in situ X-ray/neutron diffraction and HRDIC
    In: 40th Risø international symposium on materials science: metal microstructures in 2D, 3D and 4D. Vol. 580. IOP conference series: materials science and engineering. sine loco: IOP Publishing; 2019:012010 (11 pp.). https://doi.org/10.1088/1757-899X/580/1/012010
    DORA PSI
  • Polatidis E, Šmíd M, Hsu W-N, Kubenova M, Capek J, Panzner T, et al.
    The interplay between deformation mechanisms in austenitic 304 steel during uniaxial and equibiaxial loading
    Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2019; 764: 138222 (7 pp.). https://doi.org/10.1016/j.msea.2019.138222
    DORA PSI
  • Purushottam raj purohit R raj purohit, Arya A, Bojjawar G, Pelerin M, Van Petegem S, Proudhon H, et al.
    Revealing the role of microstructure architecture on strength and ductility of Ni microwires by in-situ synchrotron X-ray diffraction
    Scientific Reports. 2019; 9(1): 79 (16 pp.). https://doi.org/10.1038/s41598-018-36472-3
    DORA PSI
  • Sofinowski K, Šmíd M, Kuběna I, Vivès S, Casati N, Godet S, et al.
    In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting
    Acta Materialia. 2019; 179: 224-236. https://doi.org/10.1016/j.actamat.2019.08.037
    DORA PSI
  • Sofinowski K, Šmíd M, van Petegem S, Rahimi S, Connolley T, van Swygenhoven H
    In situ characterization of work hardening and springback in grade 2 α-titanium under tensile load
    Acta Materialia. 2019; 181: 87-98. https://doi.org/10.1016/j.actamat.2019.09.039
    DORA PSI
  • Sofinowski K, Panzner T, Kubenova M, Čapek J, Van Petegem S, Van Swygenhoven H
    In situ tension-tension strain path changes of cold-rolled Mg AZ31B
    Acta Materialia. 2019; 164: 135-152. https://doi.org/10.1016/j.actamat.2018.10.033
    DORA PSI
  • Upadhyay MV, Capek J, Panzner T, Van Swygenhoven H
    Microstructure evolution of stainless steel subjected to biaxial load path changes: in-situ neutron diffraction and multi-scale modeling
    International Journal of Plasticity. 2019; 122: 49-72. https://doi.org/10.1016/j.ijplas.2019.06.006
    DORA PSI
  • Yang T-R, Engler T, Lallensack JN, Samathi A, Makowska M, Schillinger B
    Hatching asynchrony in oviraptorid dinosaurs sheds light on their unique nesting biology
    Integrative Organismal Biology. 2019; 1(1): obz030 (17 pp.). https://doi.org/10.1093/iob/obz030
    DORA PSI
  • Zecevic M, Upadhyay MV, Polatidis E, Panzner T, Van Swygenhoven H, Knezevic M
    A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation
    Acta Materialia. 2019; 166: 386-401. https://doi.org/10.1016/j.actamat.2018.12.060
    DORA PSI
  • Dupraz M, Sun Z, Brandl C, Van Swygenhoven H
    Dislocation interactions at reduced strain rates in atomistic simulations of nanocrystalline Al
    Acta Materialia. 2018; 144: 68-79. https://doi.org/10.1016/j.actamat.2017.10.043
    DORA PSI
  • Erdakov IN, Ivanov VA, Pashnyov VA, Fekolin PV, Davydov V, Walter R, et al.
    Studies of highly filled composite based on two-component organic binder stress state in thermal stress
    In: Moldovan L, Gligor A, eds. 11th international conference on interdisciplinarity in engineering, INTER-ENG 2017, 5-6 October 2017, Tirgu-Mures, Romania. Vol. 22. Procedia manufacturing. sine loco: Elsevier; 2018:325-330. https://doi.org/10.1016/j.promfg.2018.03.049
    DORA PSI
  • Hsu W-N, Polatidis E, Šmíd M, Casati N, Van Petegem S, Van Swygenhoven H
    Load path change on superelastic NiTi alloys: in situ synchrotron XRD and SEM DIC
    Acta Materialia. 2018; 144: 874-883. https://doi.org/10.1016/j.actamat.2017.11.035
    DORA PSI
  • Neikter M, Woracek R, Maimaitiyili T, Scheffzük C, Strobl M, Antti M-L, et al.
    Alpha texture variations in additive manufactured Ti-6Al-4V investigated with neutron diffraction
    Additive Manufacturing. 2018; 23: 225-234. https://doi.org/10.1016/j.addma.2018.08.018
    DORA PSI
  • Polatidis E, Hsu W-N, Šmíd M, Van Swygenhoven H
    A high resolution digital image correlation study under multiaxial loading
    Experimental Mechanics. 2018. https://doi.org/10.1007/s11340-018-00443-6
    DORA PSI
  • Polatidis E, Hsu W-N, Šmíd M, Panzner T, Chakrabarty S, Pant P, et al.
    Suppressed martensitic transformation under biaxial loading in low stacking fault energy metastable austenitic steels
    Scripta Materialia. 2018; 147: 27-32. https://doi.org/10.1016/j.scriptamat.2017.12.026
    DORA PSI
  • Sadat T, Verezhak M, Godard P, Renault PO, Van Petegem S, Jacques V, et al.
    Plastic deformation of Insb micro-pillars: a comparative study between spatially resolved Laue and monochromatic X-Ray micro-diffraction maps
    In: Seefeldt M, ed. Residual stresses 2018. Vol. 6. Materials research proceedings. Millersville, USA: Materials Research Forum LLC.; 2018:21-26. https://doi.org/10.21741/9781945291890-4
    DORA PSI
  • Upadhyay MV, Patra A, Wen W, Panzner T, Van Petegem S, Tomé CN, et al.
    Mechanical response of stainless steel subjected to biaxial load path changes: cruciform experiments and multi-scale modeling
    International Journal of Plasticity. 2018; 108: 144-168. https://doi.org/10.1016/j.ijplas.2018.05.003
    DORA PSI
  • Verezhak M, Van Petegem S, Jacques V, Godard P, Wakonig K, Thilly L, et al.
    Visualization of crystallographic defects in InSb micropillars by ptychographic topography
    Microscopy and Microanalysis. 2018; 24(Suppl. 2): 18-19. https://doi.org/10.1017/S1431927618012527
    DORA PSI
  • Čapek J, Panzner T, Sofinowski K, Drozdenko D, Máthis K
    In situ neutron diffraction and acoustic emission during the biaxial loading of AZ31 alloy
    In: Orlov D, Joshi V, Solanki KN, Neelameggham NR, eds. Magnesium technology 2018. The minerals, metals & materials series. Cham: Springer; 2018:199-202. https://doi.org/10.1007/978-3-319-72332-7_31
    DORA PSI
  • Čapek J, Panzner T, Sofinowski KA, Drozdenko D, Máthis K
    Twinning evolution in magnesium alloys under biaxial loading
    Acta Physica Polonica A. 2018; 134(3): 853-856. https://doi.org/10.12693/APhysPolA.134.853
    DORA PSI
  • Ghosh P, Van Petegem S, Van Swygenhoven H, Chokshi AH
    An in-situ synchrotron study on microplastic flow of electrodeposited nanocrystalline nickel
    Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2017; 701: 101-110. https://doi.org/10.1016/j.msea.2017.06.075
    DORA PSI
  • Ilchuk N, Davydov V, Spätig P, Seifert H-P
    Effect of residual stresses on notch toughness of the tempered martensitic steel F82H-MOD
    Theoretical and Applied Fracture Mechanics. 2017; 90: 244-250. https://doi.org/10.1016/j.tafmec.2017.05.023
    DORA PSI
  • Irastorza-Landa A, Grilli N, Van Swygenhoven H
    Effect of pre-existing immobile dislocations on the evolution of geometrically necessary dislocations during fatigue
    Modelling and Simulation in Materials Science and Engineering. 2017; 25(5): 055010 (20 pp.). https://doi.org/10.1088/1361-651X/aa6e24
    DORA PSI
  • Irastorza-Landa A, Grilli N, Van Swygenhoven H
    Laue micro-diffraction and crystal plasticity finite element simulations to reveal a vein structure in fatigued Cu
    Journal of the Mechanics and Physics of Solids. 2017; 104: 157-171. https://doi.org/10.1016/j.jmps.2017.04.010
    DORA PSI
  • Leinenbach C, Arabi-Hashemi A, Lee WJ, Lis A, Sadegh-Ahmadi M, Van Petegem S, et al.
    Characterization of the deformation and phase transformation behavior of VC-free and VC-containing FeMnSi-based shape memory alloys by in situ neutron diffraction
    Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2017; 703: 314-323. https://doi.org/10.1016/j.msea.2017.07.077
    DORA PSI
  • Polatidis E, Zotov N, Bischoff E, Mittemeijer EJ
    Kinetics of the fcc → hcp phase transformation in Cu-Ge solid solutions upon isothermal aging
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2017; 48(11): 5304-5316. https://doi.org/10.1007/s11661-017-4319-z
    DORA PSI
  • Ulvestad A, Nashed Y, Beutier G, Verdier M, Hruszkewycz SO, Dupraz M
    Identifying defects with guided Algorithms in Bragg Coherent Diffractive Imaging
    Scientific Reports. 2017; 7(1): 9920 (9 pp.). https://doi.org/10.1038/s41598-017-09582-7
    DORA PSI
  • Upadhyay MV, Capek J, van Petegem S, Lebensohn RA, van Swygenhoven H
    Intergranular strain evolution during biaxial loading: a multiscale FE-FFT approach
    JOM: Journal of the Minerals, Metals and Materials Society. 2017; 69(5): 839-847. https://doi.org/10.1007/s11837-017-2299-5
    DORA PSI
  • Upadhyay MV, Panzner T, Van Petegem S, Van Swygenhoven H
    Stresses and strains in cruciform samples deformed in tension
    Experimental Mechanics. 2017; 57(6): 905-920. https://doi.org/10.1007/s11340-017-0270-6
    DORA PSI
  • Van Petegem S, Guitton A, Dupraz M, Bollhalder A, Sofinowski K, Upadhyay MV, et al.
    A miniaturized biaxial deformation rig for in situ mechanical testing
    Experimental Mechanics. 2017; 57(4): 569-580. https://doi.org/10.1007/s11340-016-0244-0
    DORA PSI
  • Zabihzadeh S, Cugnoni J, Duarte LI, Van Petegem S, Van Swygenhoven H
    Deformation behavior of nano-porous polycrystalline silver. Part II: simulations
    Acta Materialia. 2017; 131: 564-573. https://doi.org/10.1016/j.actamat.2017.04.041
    DORA PSI
  • Zabihzadeh S, Van Petegem S, Holler M, Diaz A, Duarte LI, Van Swygenhoven H
    Deformation behavior of nanoporous polycrystalline silver. Part I: microstructure and mechanical properties
    Acta Materialia. 2017; 131: 467-474. https://doi.org/10.1016/j.actamat.2017.04.021
    DORA PSI
  • Beran P, Heczko M, Kruml T, Panzner T, van Petegem S
    Complex investigation of deformation twinning in γ-TiAl by TEM and neutron diffraction
    Journal of the Mechanics and Physics of Solids. 2016; 95: 647-662. https://doi.org/10.1016/j.jmps.2016.05.004
    DORA PSI
  • Betz B, Rauscher P, Harti RP, Schäfer R, Van Swygenhoven H, Kaestner A, et al.
    In-situ visualization of stress-dependent bulk magnetic domain formation by neutron grating interferometry
    Applied Physics Letters. 2016; 108(1): 012405 (4 pp.). https://doi.org/10.1063/1.4939196
    DORA PSI
  • Betz B, Rauscher P, Harti RP, Schäfer R, Van Swygenhoven H, Kaestner A, et al.
    Frequency-induced bulk magnetic domain-wall freezing visualized by neutron dark-field imaging
    Physical Review Applied. 2016; 6(2): 024024 (7 pp.). https://doi.org/10.1103/PhysRevApplied.6.024024
    DORA PSI
  • Betz B, Rauscher P, Harti RP, Schäfer R, Irastorza-Landa A, Van Swygenhoven H, et al.
    Magnetization response of the bulk and supplementary magnetic domain structure in high-permeability steel laminations visualized in situ by neutron dark-field imagin
    Physical Review Applied. 2016; 6(2): 024023 (8 pp.). https://doi.org/10.1103/PhysRevApplied.6.024023
    DORA PSI
  • Bukin N, McKeever C, Burgos-Parra E, Keatley PS, Hicken RJ, Ogrin FY, et al.
    Time-resolved imaging of magnetic vortex dynamics using holography with extended reference autocorrelation by linear differential operator
    Scientific Reports. 2016; 6: 36307 (10 pp.). https://doi.org/10.1038/srep36307
    DORA PSI
  • Dupraz M, Poloni R, Ratter K, Rodney D, De Santis M, Gilles B, et al.
    Wetting layer of copper on the tantalum (001) surface
    Physical Review B. 2016; 94(23): 235427 (9 pp.). https://doi.org/10.1103/PhysRevB.94.235427
    DORA PSI
  • Irastorza-Landa A, Van Swygenhoven H, Van Petegem S, Grilli N, Bollhalder A, Brandstetter S, et al.
    Following dislocation patterning during fatigue
    Acta Materialia. 2016; 112: 184-193. https://doi.org/10.1016/j.actamat.2016.04.011
    DORA PSI
  • Kenel C, Grolimund D, Fife JL, Samson VA, Van Petegem S, Van Swygenhoven H, et al.
    Combined in situ synchrotron micro X-ray diffraction and high-speed imaging on rapidly heated and solidified Ti-48Al under additive manufacturing conditions
    Scripta Materialia. 2016; 114: 117-120. https://doi.org/10.1016/j.scriptamat.2015.12.009
    DORA PSI
  • Kenel C, Schloth P, Van Petegem S, Fife JL, Grolimund D, Menzel A, et al.
    In situ synchrotron x-ray diffraction and small angle x-ray scattering studies on rapidly heated and cooled Ti-Al and Al-Cu-Mg alloys using laser-based heating
    JOM: Journal of the Minerals, Metals and Materials Society. 2016; 68(3): 978-984. https://doi.org/10.1007/s11837-015-1774-0
    DORA PSI
  • Sun Z, Van Petegem S, Cervellino A, Blum W, Van Swygenhoven H
    Grain size and alloying effects on dynamic recovery in nanocrystalline metals
    Acta Materialia. 2016; 119: 104-114. https://doi.org/10.1016/j.actamat.2016.08.019
    DORA PSI
  • Sun Z, Blum W
    Hardening strain and recovery strain in nanocrystalline Ni investigated in tests with multiple stress changes
    Archives of Materials Science and Engineering. 2016; 79(2): 53-59. https://doi.org/10.5604/18972764.1229421
    DORA PSI
  • Upadhyay MV, Capolungo L, Taupin V, Fressengeas C, Lebensohn RA
    A higher order elasto-viscoplastic model using fast Fourier transforms: effects of lattice curvatures on mechanical response of nanocrystalline metals
    International Journal of Plasticity. 2016; 83: 126-152. https://doi.org/10.1016/j.ijplas.2016.04.007
    DORA PSI
  • Upadhyay MV, Van Petegem S, Panzner T, Lebensohn RA, Van Swygenhoven H
    Study of lattice strain evolution during biaxial deformation of stainless steel using a finite element and fast Fourier transform based multi-scale approach
    Acta Materialia. 2016; 118: 28-43. https://doi.org/10.1016/j.actamat.2016.07.028
    DORA PSI
  • Van Petegem S, Wagner J, Panzner T, Upadhyay MV, Trang TTT, Van Swygenhoven H
    In-situ neutron diffraction during biaxial deformation
    Acta Materialia. 2016; 105: 404-416. https://doi.org/10.1016/j.actamat.2015.12.015
    DORA PSI
  • Wagner JN, Hofmann M, Van Petegem S, Krempaszky C, Hoelzel M, Stockinger M
    Comparison of intergranular strain formation of conventional and newly developed nickel based superalloys
    Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2016; 662: 303-307. https://doi.org/10.1016/j.msea.2016.03.059
    DORA PSI
  • Betz B, Harti RP, Strobl M, Hovind J, Kaestner A, Lehmann E, et al.
    Quantification of the sensitivity range in neutron dark-field imaging
    Review of Scientific Instruments. 2015; 86(12): 123704 (7 pp.). https://doi.org/10.1063/1.4937616
    DORA PSI
  • Bobnar M, Böhme B, Wedel M, Burkhardt U, Ormeci A, Prots Y, et al.
    Distribution of Al atoms in the clathrate-I phase Ba8AlxSi46-x at x = 6.9
    Dalton Transactions. 2015; 44(28): 12680-12687. https://doi.org/10.1039/c5dt01198a
    DORA PSI
  • Chen B, Hu JN, Wang YQ, Zhang SY, Van Petegem S, Cocks ACF, et al.
    Role of the misfit stress between grains in the Bauschinger effect for a polycrystalline material
    Acta Materialia. 2015; 85: 229-242. https://doi.org/10.1016/j.actamat.2014.11.021
    DORA PSI
  • Grilli N, Janssens KGF, Van Swygenhoven H
    Crystal plasticity finite element modelling of low cycle fatigue in fcc metals
    Journal of the Mechanics and Physics of Solids. 2015; 84: 424-435. https://doi.org/10.1016/j.jmps.2015.08.007
    DORA PSI
  • Guitton A, Irastorza-Landa A, Broennimann R, Grolimund D, Van Petegem S, Van Swygenhoven H
    Picosecond pulsed laser for microscale sample preparation
    Materials Letters. 2015; 160: 589-591. https://doi.org/10.1016/j.matlet.2015.06.119
    DORA PSI
  • Lançon D, Tsyrulin N, Böhm M, Viennois R, Zabihzadeh S, Kusmartseva A, et al.
    Pressure induced evolution of superconductivity and magnetic hourglass dispersion in Fe1.02Te0.7Se0.3
    New Journal of Physics. 2015; 17: 043020 (5 pp.). https://doi.org/10.1088/1367-2630/17/4/043020
    DORA PSI
  • Schloth P, Menzel A, Fife J, Van Swygenhoven H, Drezet J-M
    Early cluster formation during rapid cooling of an Al-Cu-Mg alloy: in situ small-angle X-ray scattering
    Scripta Materialia. 2015; 108: 56-59. https://doi.org/10.1016/j.scriptamat.2015.06.015
    DORA PSI
  • Sun Z, Van Petegem S, Cervellino A, Durst K, Blum W, Van Swygenhoven H
    Dynamic recovery in nanocrystalline Ni
    Acta Materialia. 2015; 91: 91-100. https://doi.org/10.1016/j.actamat.2015.03.033
    DORA PSI
  • Tremsin AS, Morgano M, Panzner T, Lehmann E, Filgers U, Vallerga JV, et al.
    High resolution neutron imaging capabilities at BOA beamline at Paul Scherrer Institut
    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 2015; 784: 486-493. https://doi.org/10.1016/j.nima.2014.09.026
    DORA PSI
  • Weisser MA, Van Petegem S, Cervellino A, Van Swygenhoven H
    On the origin of cementite diffraction peak broadening during tensile deformation at ambient temperatures
    International Journal of Plasticity. 2015; 66: 138-144. https://doi.org/10.1016/j.ijplas.2014.10.008
    DORA PSI
  • Zabihzadeh S, Van Petegem S, Duarte LI, Mokso R, Cervellino A, Van Swygenhoven H
    Deformation behavior of sintered nanocrystalline silver layers
    Acta Materialia. 2015; 97: 116-123. https://doi.org/10.1016/j.actamat.2015.06.040
    DORA PSI
  • Ding L, Fanni L, Messerschmidt D, Zabihzadeh S, Masis MM, Nicolay S, et al.
    Tailoring the surface morphology of zinc oxide films for high-performance micromorph solar cells
    Solar Energy Materials and Solar Cells. 2014; 128: 378-385. https://doi.org/10.1016/j.solmat.2014.06.009
    DORA PSI
  • Eichhorn TR, Niketic N, Van Den Brandt B, Filges U, Panzner T, Rantsiou E, et al.
    Proton polarization above 70% by DNP using photo-excited triplet states, a first step towards a broadband neutron spin filter
    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 2014; 754: 10-14. https://doi.org/10.1016/j.nima.2014.03.047
    DORA PSI
  • Guitton A, Van Petegem S, Tromas C, Joulain A, Van Swygenhoven H, Thilly L
    Effect of microstructure anisotropy on the deformation of MAX polycrystals studied by in-situ compression combined with neutron diffraction
    Applied Physics Letters. 2014; 104(24): 241910 (5 pp.). https://doi.org/10.1063/1.4884601
    DORA PSI
  • Ilchuk N, Spätig P, Davydov V, Van Petegem S
    Measurement of residual stresses around the notch of tensile specimens of the high-Cr tempered martensitic steel F82H-mod
    In: Šandera P, ed. Materials structure & micromechanics of fracture VII. Vol. 592-593. Key engineering materials. Baech, Switzerland: Trans Tech Publications; 2014:295-298. https://doi.org/10.4028/www.scientific.net/KEM.592-593.295
    DORA PSI
  • Kovářík O, Haušild P, Siegl J, Pala Z, Matějíček J, Davydov V
    The influence of plasma sprayed multilayers of Cr2O3 and Ni10wt%Al on fatigue resistance
    Surface and Coatings Technology. 2014; 251: 143-150. https://doi.org/10.1016/j.surfcoat.2014.04.018
    DORA PSI
  • Lehmann EH, Peetermans S, Josic L, Leber H, van Swygenhoven H
    Energy-selective neutron imaging with high spatial resolution and its impact on the study of crystalline-structured materials
    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 2014; 735: 102-109. https://doi.org/10.1016/j.nima.2013.08.065
    DORA PSI
  • Li D-F, Golden BJ, Zhang S-Y, Davydov V, Tiernan P, O’Dowd NP
    The role of plasticity in the transverse lattice strain evolution of a martensitic steel
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2014; 45(13): 5829-5833. https://doi.org/10.1007/s11661-014-2562-0
    DORA PSI
  • Marichal C, Srivastava K, Weygand D, Van Petegem S, Grolimund D, Gumbsch P, et al.
    Origin of anomalous slip in tungsten
    Physical Review Letters. 2014; 113(2): 025501 (5 pp.). https://doi.org/10.1103/PhysRevLett.113.025501
    DORA PSI
  • Morgano M, Peetermans S, Lehmann EH, Panzner T, Filges U
    Neutron imaging options at the BOA beamline at Paul Scherrer Institut
    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 2014; 754: 46-56. https://doi.org/10.1016/j.nima.2014.03.055
    DORA PSI
  • Mosset J-B, Stoykov A, Greuter U, Hildebrandt M, Schlumpf N, Van Swygenhoven H
    Evaluation of two thermal neutron detection units consisting of ZnS/6LiF scintillating layers with embedded WLS fibers read out with a SiPM
    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 2014; 764: 299-304. https://doi.org/10.1016/j.nima.2014.07.060
    DORA PSI
  • Mosset JB, Stoykov A, Davydov V, Hildebrandt M, Van Swygenhoven H, Wagner W
    Upgrade of the POLDI diffractometer with a ZnS(Ag)/6LiF scintillation detector read out with WLS fibers coupled to SiPMs
    In: Internaional workshop on neutron optics and detectors (NOP&D 2013). Vol. 528. Journal of physics: conference series. Bristol, Philadelphia: IOP Publishing Ltd; 2014:012041 (8 pp.). https://doi.org/10.1088/1742-6596/528/1/012041
    DORA PSI
  • Rantsiou E, Panzner T, Hautle P, Filges U
    Using parabolic supermirror lenses to focus and de-focus a neutron beam
    In: Internaional workshop on neutron optics and detectors (NOP&D 2013). Vol. 528. Journal of physics: conference series. Bristol, Philadelphia: IOP Publishing Ltd; 2014:012009 (8 pp.). https://doi.org/10.1088/1742-6596/528/1/012009
    DORA PSI
  • Repper J, Niffenegger M, Van Petegem S, Wagner W, Van Swygenhoven H
    In-situ biaxial mechanical testing at the neutron time-of-flight diffractometer POLDI
    In: Kurz SJB, Mittemeijer EJ, Scholtes B, eds. International conference on residual stresses 9 (ICRS 9). Selected, peer reviewed papers from the 9th international conference on residual stresses (ICRS 9), October 7-9, 2012, Garmisch-Partenkirchen, Germany. Vol. 768-769. Materials science forum. sine loco: Trans Tech Publications; 2014:60-65. https://doi.org/10.4028/www.scientific.net/MSF.768-769.60
    DORA PSI
  • Salvemini F, Grazzi F, Angelini I, Davydov V, Vontobel P, Vigoni A, et al.
    Residual strain mapping of Roman styli from Iulia Concordia, Italy
    Materials Characterization. 2014; 91: 58-64. https://doi.org/10.1016/j.matchar.2014.02.008
    DORA PSI
  • Schloth P, Wagner JN, Fife JL, Menzel A, Drezet J-M, Van Swygenhoven H
    Early precipitation during cooling of an Al-Zn-Mg-Cu alloy revealed by in situ small angle X-ray scattering
    Applied Physics Letters. 2014; 105(10): 101908 (4 pp.). https://doi.org/10.1063/1.4894768
    DORA PSI
  • Stoykov A, Mosset J-B, Greuter U, Hildebrandt M, Schlumpf N
    Use of Silicon Photomultipliers in ZnS:6LiF scintillation neutron detectors: signal extraction in presence of high dark count rates
    Journal of Instrumentation. 2014; 9(6): P06015 (10 pp.). https://doi.org/10.1088/1748-0221/9/06/P06015
    DORA PSI
  • Talanov V, Cheptiakov D, Filges U, Forss SH, Panzner T, Pomjakushin V, et al.
    Thermal neutron beam characterization at the HRPT instrument at the Swiss spallation neutron source
    In: Petit-Jean-Genaz C, Arduini G, Michel P, Schaa VRW, eds. IPAC14. International particle accelerator conference. Vol. 5. International particle accelerator conference. Geneva, Switzerland: JACoW Publishing; 2014:2134-2136. https://doi.org/10.18429/JACoW-IPAC2014-WEPRO077
    DORA PSI
  • Taran YV, Balagurov AM, Venter AM, Evans A
    Martensitic transformation of austenitic stainless steel cruciform geometry sample by biaxially fatigued cycling
    In: Brokmeier HG, Müller M, Pranzas PK, Schreyer A, Staron P, eds. Mechanical stress evaluation by neutrons and synchrotron radiation VI. Selected, peer reviewed papers from the 6th international conference on mechanical stress evaluation by neutrons and synchrotron radiation (MECA SENS VI 2011), September 7-9, 2011, Hamburg, Germany. Vol. 772. Materials science forum. sine loco: Trans Tech Publications; 2014:109-115. https://doi.org/10.4028/www.scientific.net/MSF.772.109
    DORA PSI
  • Taran Y, Balagurov A, Sabirov B, Davydov V, Venter A
    Neutron diffraction investigation of residual stresses induced in niobium-steel bilayer pipe manufactured by explosive welding
    In: Kurz SJB, Mittemeijer EJ, Scholtes B, eds. Vol. 768-769. Materials science forum. sine loco: Trans Tech Publications; 2014:697-704. https://doi.org/10.4028/www.scientific.net/MSF.768-769.697
    DORA PSI
  • Woodhead J, Booker JD, Truman CE, Davydov V
    Measurement of forming stresses in plain spherical bearings using neutron diffraction
    In: Holden T, Muránsky O, Hamelin CJ, eds. MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION VII. Vol. 777. Materials science forum. sine loco: Trans Tech Publications; 2014:58-64. https://doi.org/10.4028/www.scientific.net/MSF.777.58
    DORA PSI
  • Marichal C, Van Swygenhoven H, Van Petegem S, Borca C
    {110} slip with {112} slip traces in bcc tungsten
    Scientific Reports. 2013; 3: 2547 (7 pp.). https://doi.org/10.1038/srep02547
    DORA PSI
  • Oveisi E, Bártová B, Gerstl S, Zimmermann J, Marichal C, Van Swygenhoven H, et al.
    Nanoprecipitates in single-crystal molybdenum-alloy nanopillars detected by TEM and atom probe tomography
    Scripta Materialia. 2013; 69(1): 41-44. https://doi.org/10.1016/j.scriptamat.2013.03.013
    DORA PSI
  • Pierret S, Etter T, Evans A, Van Swygenhoven H
    Origin of localized rafting in Ni-based single crystal turbine blades before service and its influence on the mechanical properties
    Acta Materialia. 2013; 61(5): 1478-1488. https://doi.org/10.1016/j.actamat.2012.11.024
    DORA PSI
  • Strunz P, Petrenec M, Davydov V, Polák J, Beran P
    Misfit in Inconel-type superalloy
    Advances in Materials Science and Engineering. 2013; 2013: 408347 (7 pp.). https://doi.org/10.1155/2013/408347
    DORA PSI
  • Van Petegem S, Li L, Anderson PM, Van Swygenhoven H
    Deformation mechanisms in nanocrystalline metals: insights from in-situ diffraction and crystal plasticity modelling
    Thin Solid Films. 2013; 530: 20-24. https://doi.org/10.1016/j.tsf.2012.03.053
    DORA PSI
  • Van Petegem S, Zimmermann J, Brandstetter S, Sauvage X, Legros M, Van Swygenhoven H
    Microstructure and deformation mechanisms in nanocrystalline Ni-Fe. Part I. microstructure
    Acta Materialia. 2013; 61(15): 5835-5845. https://doi.org/10.1016/j.actamat.2013.06.031
    DORA PSI
  • Van Petegem S, Zimmermann J, Van Swygenhoven H
    Microstructure and deformation mechanisms in nanocrystalline Ni-Fe. Part II. in situ testing during X-ray diffraction
    Acta Materialia. 2013; 61(15): 5846-5856. https://doi.org/10.1016/j.actamat.2013.06.029
    DORA PSI
  • Van Swygenhoven H, Van Petegem S
    In-situ mechanical testing during X-ray diffraction
    Materials Characterization. 2013; 78: 47-59. https://doi.org/10.1016/j.matchar.2012.12.010
    DORA PSI
  • Zhang SY, Evans A, Eren E, Chen B, Pavier M, Wang Y, et al.
    ENGIN-X - instrument for materials science and engineering research
    Neutron News. 2013; 24(3): 22-26. https://doi.org/10.1080/10448632.2013.804362
    DORA PSI
  • Drezet JM, Evans A, Pirling T, Pitié B
    Stored elastic energy in aluminium alloy AA 6063 billets: residual stress measurements and thermomechanical modelling
    International Journal of Cast Metals Research. 2012; 25(2): 110-116. https://doi.org/10.1179/1743133611Y.0000000029
    DORA PSI
  • Kriška M, Tacq J, Van Acker K, Seefeldt M, Van Petegem SV
    Neutron and X-ray diffraction study of residual and internal stress evolution in pearlitic steel during cold drawing
    In: 5th European conference on neutron scattering. Vol. 340. Journal of physics: conference series. Bristol, Philadelphia: IOP Publishing Ltd; 2012:012101 (7 pp.). https://doi.org/10.1088/1742-6596/340/1/012101
    DORA PSI
  • Li L, Van Petegem S, Van Swygenhoven H, Anderson PM
    Slip-induced intergranular stress redistribution in nanocrystalline Ni
    Acta Materialia. 2012; 60(20): 7001-7010. https://doi.org/10.1016/j.actamat.2012.09.007
    DORA PSI
  • Maaß R, Uchic MD
    In-situ characterization of the dislocation-structure evolution in Ni micro-pillars
    Acta Materialia. 2012; 60(3): 1027-1037. https://doi.org/10.1016/j.actamat.2011.11.007
    DORA PSI
  • Malard B, Pilch J, Sittner P, Davydov V, Sedlák P, Konstantinidis K, et al.
    Internal stresses in steel plate generated by shape memory alloy inserts
    Acta Materialia. 2012; 60(3): 1378-1394. https://doi.org/10.1016/j.actamat.2011.10.024
    DORA PSI
  • Pierret S, Evans A, Paradowska AM, Kaestner A, James J, Etter T, et al.
    Combining neutron diffraction and imaging for residual strain measurements in a single crystal turbine blade
    NDT and E International. 2012; 45(1): 39-45. https://doi.org/10.1016/j.ndteint.2011.08.009
    DORA PSI
  • Rangel T, Kecik D, Trevisanutto PE, Rignanese G-M, Van Swygenhoven H, Olevano V
    Band structure of gold from many-body perturbation theory
    Physical Review B. 2012; 86(12): 125125 (9 pp.). https://doi.org/10.1103/PhysRevB.86.125125
    DORA PSI
  • Repper J, Hofmann M, Krempaszky C, Regener B, Berhuber E, Petry W, et al.
    Effect of macroscopic relaxation on residual stress analysis by diffraction methods
    Journal of Applied Physics. 2012; 112(6): 064906 (6 pp.). https://doi.org/10.1063/1.4752877
    DORA PSI
  • Requena G, Yubero DC, Corrochano J, Repper J, Garcés G
    Stress relaxation during thermal cycling of particle reinforced aluminium matrix composites
    Composites Part A: Applied Science and Manufacturing. 2012; 43(11): 1981-1988. https://doi.org/10.1016/j.compositesa.2012.07.004
    DORA PSI
  • Robinson JS, Tanner DA, van Petegem S, Evans A
    Influence of quenching and aging on residual stress in Al-Zn-Mg-Cu alloy 7449
    Materials Science and Technology. 2012; 28(4): 420-430. https://doi.org/10.1179/1743284711Y.0000000063
    DORA PSI
  • Schloth P, Weisser MA, Van Swygenhoven H, Van Petegem S, Susila P, Subramanya Sarma V, et al.
    Two strain-hardening mechanisms in nanocrystalline austenitic steel: an in situ synchrotron X-ray diffraction study
    Scripta Materialia. 2012; 66(9): 690-693. https://doi.org/10.1016/j.scriptamat.2012.01.021
    DORA PSI
  • Taran YV, Balagurov AM, Sabirov BM, Evans A, Davydov V, Venter AM
    Residual stresses in a stainless steel - titanium alloy joint made with the explosive technique
    In: 7th european conference on neutron scattering. Vol. 340. Journal of physics: conference series. Bristol, UK: IOP Publishing; 2012:012105 (8 pp.). https://doi.org/10.1088/1742-6596/340/1/012105
    DORA PSI
  • Taran YV, Balagurov AM, Schreiber J, Evans A, Venter AM
    Residual stresses in biaxially fatigued austenitic stainless steel sample of cruciform geometry
    In: 5th european conference on neutron scattering. Vol. 340. Journal of physics: conference series. Bristol, Philadelphia: IOP Publishing Ltd; 2012:012099 (9 pp.). https://doi.org/10.1088/1742-6596/340/1/012099
    DORA PSI
  • Zimmermann J, Van Swygenhoven H, Marichal C, Van Petegem S, Borca C, Bartova B, et al.
    Slip in directionally solidified Mo-alloy micropillars - part I: nominally dislocation-free pillars
    Acta Materialia. 2012; 60(11): 4604-4613. https://doi.org/10.1016/j.actamat.2012.02.043
    DORA PSI
  • Zimmermann J, Van Swygenhoven H, Van Petegem S, Borca C
    Slip in directionally solidified Mo-alloy micropillars - part II: pillars containing defects
    Acta Materialia. 2012; 60(11): 4614-4622. https://doi.org/10.1016/j.actamat.2012.02.042
    DORA PSI
  • Albert S, Albert KK, Lerch P, Quack M
    General discussion [on synchrotron based high resolution Fourier transform spectroscopy]
    Faraday Discussions. 2011; 150. https://doi.org/10.1039/C1FD90001C
    DORA PSI
  • Albert S, Albert KK, Lerch P, Quack M
    General discussion [on the high resolution FTIR spectroscopy of phenol and torsional tunneling]
    Faraday Discussions. 2011; 150: 505-532. https://doi.org/10.1039/C1FD90004H
    DORA PSI
  • Albert S, Albert KK, Lerch P, Quack M
    Synchrotron-based highest resolution Fourier transform infrared spectroscopy of naphthalene (C10H8) and indole (C8H7N) and its application to astrophysical problems
    Faraday Discussions. 2011; 150: 71-99. https://doi.org/10.1039/c0fd00013b
    DORA PSI
  • Brandl C, Derlet PM, Van Swygenhoven H
    Dislocation mediated plasticity in nanocrystalline Al: the strongest size
    Modelling and Simulation in Materials Science and Engineering. 2011; 19(7): 74005 (11 pp.). https://doi.org/10.1088/0965-0393/19/7/074005
    DORA PSI
  • Carroll L, Friedli P, Lerch P, Schneider J, Treyer D, Hunziker S, et al.
    Ultra-broadband infrared pump-probe spectroscopy using synchrotron radiation and a tuneable pump
    Review of Scientific Instruments. 2011; 82(6): 63101 (9 pp.). https://doi.org/10.1063/1.3592332
    DORA PSI
  • Chiesa S, Derlet PM, Dudarev SL, Van Swygenhoven H
    Optimization of the magnetic potential for α-Fe
    Journal of Physics: Condensed Matter. 2011; 23(20): 206001 (14 pp.). https://doi.org/10.1088/0953-8984/23/20/206001
    DORA PSI
  • Drezet JM, Evans A, Pirling T
    Residual stresses in DC cast aluminum billet: neutron diffraction measurements and thermomechanical modeling
    In: Menary G, ed. ESAFORM 2011. Proceedings. The 14th international conference on material forming. Vol. 1353. AIP conference proceedings. sine loco: AIP Publishing; 2011:1131-1136. https://doi.org/10.1063/1.3589668
    DORA PSI
  • Gao N, Van Swygenhoven H, Victoria M, Chen J
    Formation of dislocation loops during He clustering in bcc Fe
    Journal of Physics: Condensed Matter. 2011; 23(44): 442201 (5 pp.). https://doi.org/10.1088/0953-8984/23/44/442201
    DORA PSI
  • Gao N, Victoria M, Chen J, Van Swygenhoven H
    Helium-vacancy cluster in a single bcc iron crystal lattice
    Journal of Physics: Condensed Matter. 2011; 23(24): 1-8. https://doi.org/10.1088/0953-8984/23/24/245403
    DORA PSI
  • Lerch P, Quaroni L
    IR workshop at Biozentrum Basel
    Synchrotron Radiation News. 2011; 24(3): 28. https://doi.org/10.1080/08940886.2011.583888
    DORA PSI
  • Malfait WJ, Sanchez-Valle C, Ardia P, Médard E, Lerch P
    Compositional dependent compressibility of dissolved water in silicate glasses
    American Mineralogist. 2011; 96(8-9): 1402-1409. https://doi.org/10.2138/am.2011.3718
    DORA PSI
  • Quaroni L, Zlateva T, Normand E
    Detection of weak absorption changes from molecular events in time-resolved FT-IR spectromicroscopy measurements of single functional cells
    Analytical Chemistry. 2011; 83(19): 7371-7380. https://doi.org/10.1021/ac201318z
    DORA PSI
  • Quaroni L, Zlateva T
    Infrared spectromicroscopy of biochemistry in functional single cells
    Analyst. 2011; 136(16): 3219-3232. https://doi.org/10.1039/c1an15060j
    DORA PSI
  • Taran YV, Balagurov AM, Schreiber J, Evans A, Venter AM
    Residual stresses in biaxially fatigued austenitic stainless steel sample of cruciform geometry
    Physics of Particles and Nuclei Letters. 2011; 8(2): 136-140. https://doi.org/10.1134/S1547477111020130
    DORA PSI
  • Van Petegem S, Zimmermann J, Van Swygenhoven H
    Yield point phenomenon during strain rate change in nanocrystalline Ni-Fe
    Scripta Materialia. 2011; 65(3): 217-220. https://doi.org/10.1016/j.scriptamat.2011.04.007
    DORA PSI
  • Velasco M, Van Swygenhoven H, Brandl C
    Coupled grain boundary motion in a nanocrystalline grain boundary network
    Scripta Materialia. 2011; 65(2): 151-154. https://doi.org/10.1016/j.scriptamat.2011.03.039
    DORA PSI
  • Weisser MA, Evans AD, Van Petegem S, Holdsworth SR, Van Swygenhoven H
    In situ room temperature tensile deformation of a 1% CrMoV bainitic steel using synchrotron and neutron diffraction
    Acta Materialia. 2011; 59(11): 4448-4457. https://doi.org/10.1016/j.actamat.2011.03.068
    DORA PSI
  • Brandl C, Tiwari S, Derlet PM, Van Swygenhoven H
    Athermal critical stresses for dislocation propagation in nanocrystalline aluminium
    Philosophical Magazine. 2010; 90(7-8): 977-989. https://doi.org/10.1080/14786430903124444
    DORA PSI
  • Drezet JM, Evans A, Jaquerod C, Phillion A
    Measurement of as-cast residual stresses in an aluminium alloy AA6063 billet using neutron diffraction
    In: Jim Evans Honorary Symposium: Proceedings of the Symposium Sponsored by the Light Metals Division of The Minerals, Metals and Materials Society (TMS). TMS Annual Meeting. ; 2010:43-52.
    DORA PSI
  • Fadenberger K, Gunduz IE, Tsotsos C, Kokonou M, Gravani S, Brandstetter S, et al.
    In situ observation of rapid reactions in nanoscale Ni-Al multilayer foils using synchrotron radiation
    Applied Physics Letters. 2010; 97(14): 144101 (3 pp.). https://doi.org/10.1063/1.3485673
    DORA PSI
  • Frick CP, Clark BG, Schneider AS, Maaß R, Petegem SV, Swygenhoven HV
    On the plasticity of small-scale nickel-titanium shape memory alloys
    Scripta Materialia. 2010; 62(7): 492-495. https://doi.org/10.1016/j.scriptamat.2009.12.023
    DORA PSI
  • Jennings E, Montgomery W, Lerch P
    Stability of coronene at high temperature and pressure
    Journal of Physical Chemistry B. 2010; 114(48): 15753-15758. https://doi.org/10.1021/jp105020f
    DORA PSI
  • Lucarelli A, Dusza A, Pfuner F, Lerch P, Analytis JG, Chu J-H, et al.
    Charge dynamics of Co-doped BaFe2As2
    New Journal of Physics. 2010; 12(7): 073036 (13 pp.). https://doi.org/10.1088/1367-2630/12/7/073036
    DORA PSI
  • Martin MC, Schade U, Lerch P, Dumas P
    Recent applications and current trends in analytical chemistry using synchrotron-based Fourier-transform infrared microspectroscopy
    Trends in Analytical Chemistry. 2010; 29(6): 453-463. https://doi.org/10.1016/j.trac.2010.03.002
    DORA PSI
  • Pfuner F, Lerch P, Chu J-H, Kuo H-H, Fisher IR, Degiorgi L
    Temperature dependence of the excitation spectrum in the charge-density-wave ErTe3 and HoTe3 systems
    Physical Review B. 2010; 81(19): 195110 (7 pp.). https://doi.org/10.1103/PhysRevB.81.195110
    DORA PSI
  • Turski M, Clitheroe S, Evans AD, Rodopoulos C, Hughes DJ, Withers PJ
    Engineering the residual stress state and microstructure of stainless steel with mechanical surface treatments
    Applied Physics A: Materials Science and Processing. 2010; 99(3): 549-556. https://doi.org/10.1007/s00339-010-5672-6
    DORA PSI
  • Van Swygenhoven H, Van Petegem S
    The use of Laue microdiffraction to study small-scale plasticity
    JOM: Journal of the Minerals, Metals and Materials Society. 2010; 62(12): 36-43. https://doi.org/10.1007/s11837-010-0178-4
    DORA PSI
  • Zhao R, Quaroni L, Casson AG
    Fourier transform infrared (FTIR) spectromicroscopic characterization of stem-like cell populations in human esophageal normal and adenocarcinoma cell lines
    Analyst. 2010; 135(1): 53-61. https://doi.org/10.1039/b914311d
    DORA PSI
  • Zimmermann J, Van Petegem S, Bei H, Grolimund D, George EP, Van Swygenhoven H
    Effects of focused ion beam milling and pre-straining on the microstructure of directionally solidified molybdenum pillars: a Laue diffraction analysis
    Scripta Materialia. 2010; 62(10): 746-749. https://doi.org/10.1016/j.scriptamat.2010.02.013
    DORA PSI
  • Bechtel HA, Martin MC, May TE, Lerch P
    Improved spatial resolution for reflection mode infrared microscopy
    Review of Scientific Instruments. 2009; 80(12): 126106 (3 pp.). https://doi.org/10.1063/1.3270260
    DORA PSI
  • Bitzek E, Brandl C, Weygand D, Derlet PM, Van Swygenhoven H
    Atomistic simulation of a dislocation shear loop interacting with grain boundaries in nanocrystalline aluminium
    Modelling and Simulation in Materials Science and Engineering. 2009; 17(5): 055008 (8 pp.). https://doi.org/10.1088/0965-0393/17/5/055008
    DORA PSI
  • Brandl C, Derlet PM, Van Swygenhoven H
    Strain rates in molecular dynamics simulations of nanocrystalline metals
    Philosophical Magazine. 2009; 89(34-36): 3465-3475. https://doi.org/10.1080/14786430903313690
    DORA PSI
  • Chiesa S, Derlet PM, Dudarev SL, Van Swygenhoven H
    Atomistic calculation of elastic constants of alpha-iron containing point defects by means of magnetic interatomic potentials
    Journal of Nuclear Materials. 2009; 386-388: 49-51. https://doi.org/10.1016/j.jnucmat.2008.12.056
    DORA PSI
  • Chiesa S, Derlet PM, Dudarev SL
    Free energy of a ⟨110⟩ dumbbell interstitial defect in bcc Fe: Harmonic and anharmonic contributions
    Physical Review B. 2009; 79(21): 214109. https://doi.org/10.1103/PhysRevB.79.214109
    DORA PSI
  • Chiesa S, Gilbert MR, Dudarev SL, Derlet PM, Van Swygenhoven H
    The non-degenerate core structure of a ½⟨111⟩ screw dislocation in bcc transition metals modelled using Finnis-Sinclair potentials: the necessary and sufficient conditions
    Philosophical Magazine. 2009; 89(34-36): 3235-3243. https://doi.org/10.1080/14786430903250835
    DORA PSI
  • Derlet PM, Gumbsch P, Hoagland R, Li J, McDowell DL, Van Swygenhoven H, et al.
    Atomistic simulations of dislocations in confined volumes
    MRS Bulletin. 2009; 34(3): 184-189. https://doi.org/10.1557/mrs2009.50
    DORA PSI
  • Derlet PM, Van Petegem S, Van Swygenhoven H
    Vibrational properties of grain boundaries in nanocrystalline Ni using second moment potentials
    Philosophical Magazine. 2009; 89(34-36): 3511-3529. https://doi.org/10.1080/14786430903258200
    DORA PSI
  • Dudarev SL, Boutard JL, Lässer R, Caturla MJ, Derlet PM, Fivel M, et al.
    The EU programme for modelling radiation effects in fusion reactor materials: an overview of recent advances and future goals
    Journal of Nuclear Materials. 2009; 386-388: 1-7. https://doi.org/10.1016/j.jnucmat.2008.12.301
    DORA PSI
  • Eibl S, Fitch A, Brunelli M, Evans AD, Pattison P, Plazanet M, et al.
    trans-Decahydronaphthalene (decalin) from powder diffraction data
    Acta Crystallographica Section C: Structural Chemistry. 2009; 65(6): o278-o280. https://doi.org/10.1107/S0108270109013365
    DORA PSI
  • Elsener A, Politano O, Derlet PM, Van Swygenhoven H
    Variable-charge method applied to study coupled grain boundary migration in the presence of oxygen
    Acta Materialia. 2009; 57(6): 1988-2001. https://doi.org/10.1016/j.actamat.2009.01.001
    DORA PSI
  • Evans AD, King A, Pirling T, Peyre P, Wither PJ
    Characterisation of residual stresses generated by laser shock peening by neutron and synchrotron diffraction
    In: Pantelakis S, Rodopoulos C, eds. Engineering against fracture. Proceedings of the 1st conference. Dordrecht: Springer; 2009:383-398. https://doi.org/10.1007/978-1-4020-9402-6_31
    DORA PSI
  • Evans A, Van Petegem S, Van Swygenhoven H
    POLDI: materials science and engineering instrument at SINQ
    Neutron News. 2009; 20(3): 17-19. https://doi.org/10.1080/10448630903120437
    DORA PSI
  • Huang H, Van Swygenhoven H
    Atomistic simulations of mechanics of nanostructures
    MRS Bulletin. 2009; 34(3): 160-162. https://doi.org/10.1557/mrs2009.46
    DORA PSI
  • Kuzmenko AB, van Heumen E, van der Marel D, Lerch P, Blake P, Novoselov KS, et al.
    Infrared spectroscopy of electronic bands in bilayer graphene
    Physical Review B. 2009; 79(11): 115441 (5 pp.). https://doi.org/10.1103/PhysRevB.79.115441
    DORA PSI
  • Li L, Anderson PM, Lee M-G, Bitzek E, Derlet P, van Swygenhoven H
    The stress-strain response of nanocrystalline metals: a quantized crystal plasticity approach
    Acta Materialia. 2009; 57(3): 812-822. https://doi.org/10.1016/j.actamat.2008.10.035
    DORA PSI
  • Maaß R, Van Petegem S, Borca CN, Van Swygenhoven H
    In situ Laue diffraction of metallic micropillars
    Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2009; 524(1-2): 40-45. https://doi.org/10.1016/j.msea.2009.05.062
    DORA PSI
  • Maaß R, Van Petegem S, Ma D, Zimmermann J, Grolimund D, Roters F, et al.
    Smaller is stronger: the effect of strain hardening
    Acta Materialia. 2009; 57(20): 5996-6005. https://doi.org/10.1016/j.actamat.2009.08.024
    DORA PSI
  • Thilly L, Van Petegem S, Renault P-O, Lecouturier F, Vidal V, Schmitt B, et al.
    A new criterion for elasto-plastic transition in nanomaterials: application to size and composite effects on Cu-Nb nanocomposite wires
    Acta Materialia. 2009; 57(11): 3157-3169. https://doi.org/10.1016/j.actamat.2009.03.021
    DORA PSI
  • Van Petegem S, Brandstetter S, Schmitt B, Van Swygenhoven H
    Creep in nanocrystalline Ni during X-ray diffraction
    Scripta Materialia. 2009; 60(5): 297-300. https://doi.org/10.1016/j.scriptamat.2008.10.034
    DORA PSI
  • Van Petegem S, Brandstetter S, Maass R, Hodge AM, El-Dasher BS, Biener J, et al.
    On the microstructure of nanoporous gold: an X-ray diffraction study
    Nano Letters. 2009; 9(3): 1158-1163. https://doi.org/10.1021/nl803799q
    DORA PSI
  • Vidal V, Thilly L, Van Petegem S, Stuhr U, Lecouturier F, Renault P-O, et al.
    Plasticity of nanostructured Cu-Nb-based wires: strengthening mechanisms revealed by in situ deformation under neutrons
    Scripta Materialia. 2009; 60(3): 171-174. https://doi.org/10.1016/j.scriptamat.2008.09.032
    DORA PSI
  • Aswal VK, van den Brandt B, Hautle P, Kohlbrecher J, Konter JA, Michels A, et al.
    Characterisation of the polarised neutron beam at the small angle scattering instrument SANS-I with a polarised proton target
    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 2008; 586(1): 86-89. https://doi.org/10.1016/j.nima.2007.11.062
    DORA PSI
EPFL.png

Contact

PEM
Paul Scherrer Institut
CH-5232 Villigen-PSI
Switzerland

Prof. Helena Van Swygenhoven
Group Leader

Telephone:
+41 56 310 2931
E-mail:
helena.vs@psi.ch

SINQ Facility

Information about the Neutron Source.

LSC Homepage

Laboratory for Condensed Matter Physics

Photon Science Division

Homepage of PSI Division Photon Science (PSD)

Scientific Highlights PSD

Scientific Highlights of PSI Division Photon Science (PSD)

Swiss Light Source SLS

Synchrotron light large research facility.

SwissFEL

The new X-ray free electron laser facility.

User Office

The PSI User Office is a central PSI installation to serve the users from all the four user laboratories.

Current openings PSD

Job Opportunities at Research Division Photon Science

Directions to PSI

How to get to the Paul Scherrer Institute (description and map)