Dieser Inhalt ist nicht auf Deutsch verfügbar.

Publications

Esmaeilzadeh R, Hamidi-Nasab M, de Formanoir C, Schlenger L, Van Petegem S, Navarre C, et al.
In-situ selective laser heat treatment for microstructural control of additively manufactured Ti-6Al-4V
Additive Manufacturing. 2023; 78: 103882 (14 pp.). https://doi.org/10.1016/j.addma.2023.103882
DORA PSI
Nielsen LC, Erhart P, Guizar-Sicairos M, Liebi M
Small-angle scattering tensor tomography algorithm for robust reconstruction of complex textures
Acta Crystallographica Section A: Foundations and Advances. 2023; 79(6): 515-526. https://doi.org/10.1107/S205327332300863X
DORA PSI
Gao S, Li Z, Van Petegem S, Ge J, Goel S, Vas JV, et al.
Additive manufacturing of alloys with programmable microstructure and properties
Nature Communications. 2023; 14(1): 6752 (11 pp.). https://doi.org/10.1038/s41467-023-42326-y
DORA PSI
Makowska MG, Verga F, Pfeiffer S, Marone F, Chang CST, Florio K, et al.
Operando tomographic microscopy during laser-based powder bed fusion of alumina
Communications Materials. 2023; 4: 73 (15 pp.). https://doi.org/10.1038/s43246-023-00401-3
DORA PSI
Björn L, Melhado Mazza R, Andreasson E, Linell F, Lutz-Bueno V, Guizar-Sicairos M, et al.
Scanning small-angle X-ray scattering of injection-molded polymers: anisotropic structure and mechanical properties of low-density polyethylene
ACS Applied Polymer Materials. 2023; 5(8): 6429-6440. https://doi.org/10.1021/acsapm.3c01007
DORA PSI
Tsolaki E, Corso P, Zboray R, Avaro J, Appel C, Liebi M, et al.
Multiscale multimodal characterization and simulation of structural alterations in failed bioprosthetic heart valves
Acta Biomaterialia. 2023. https://doi.org/10.1016/j.actbio.2023.07.044
DORA PSI
Olsson M, Govender R, Diaz A, Holler M, Menzel A, Abrahmsén-Alami S, et al.
Multiscale X-ray imaging and characterisation of pharmaceutical dosage forms
International Journal of Pharmaceutics. 2023; 642: 123200 (10 pp.). https://doi.org/10.1016/j.ijpharm.2023.123200
DORA PSI
Gh Ghanbari P, Markovic P, Van Petegem S, Makowska MG, Wrobel R, Mayer T, et al.
A close look at temperature profiles during laser powder bed fusion using operando X-ray diffraction and finite element simulations
Additive Manufacturing Letters. 2023; 6: 100150 (9 pp.). https://doi.org/10.1016/j.addlet.2023.100150
DORA PSI
Godard P, Verezhak M, Sadat T, Mignerot F, Jacques VLR, Le Bolloc'h D, et al.
In situ compression of micropillars under coherent X-ray diffraction: a case study of experimental and data-analysis constraints
Journal of Applied Crystallography. 2023; 56(2): 381-390. https://doi.org/10.1107/S1600576723000493
DORA PSI
Simutis G, Bollhalder A, Zolliker M, Küspert J, Wang Q, Das D, et al.
In situ uniaxial pressure cell for x-ray and neutron scattering experiments
Review of Scientific Instruments. 2023; 94: 013906 (7 pp.). https://doi.org/10.1063/5.0114892
DORA PSI
König H-H, Holländer Pettersson N, Durga A, Van Petegem S, Grolimund D, Chuang AC, et al.
Solidification modes during additive manufacturing of steel revealed by high-speed X-ray diffraction
Acta Materialia. 2023; 246: 118713 (11 pp.). https://doi.org/10.1016/j.actamat.2023.118713
DORA PSI
Lo Re G, Engel ER, Björn L, Guizar Sicairos M, Liebi M, Wahlberg J, et al.
Melt processable cellulose fibres engineered for replacing oil-based thermoplastics
Chemical Engineering Journal. 2023; 458: 141372 (8 pp.). https://doi.org/10.1016/j.cej.2023.141372
DORA PSI
Silva Barreto I, Pierantoni M, Hammerman M, Törnquist E, Le Cann S, Diaz A, et al.
Nanoscale characterization of collagen structural responses to in situ loading in rat Achilles tendons
Matrix Biology. 2023; 115: 32-47. https://doi.org/10.1016/j.matbio.2022.11.006
DORA PSI
Chen M, Simonelli M, Van Petegem S, Tse YY, Chang CST, Makowska MG, et al.
A quantitative study of thermal cycling along the build direction of Ti-6Al-4V produced by laser powder bed fusion
Materials and Design. 2023; 225: 111458 (11 pp.). https://doi.org/10.1016/j.matdes.2022.111458
DORA PSI
Härtel M, Illgen C, Panzner T, Bruder E, Schmaltz S, Van Petegem S, et al.
Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel
International Journal of Plasticity. 2022; 159: 103478 (19 pp.). https://doi.org/10.1016/j.ijplas.2022.103478
DORA PSI
Chen M, Van Petegem S, Zou Z, Simonelli M, Tse YY, Chang CST, et al.
Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion
Additive Manufacturing. 2022; 59: 103173 (10 pp.). https://doi.org/10.1016/j.addma.2022.103173
DORA PSI
Pandiyan V, Masinelli G, Claire N, Le-Quang T, Hamidi-Nasab M, de Formanoir C, et al.
Deep learning-based monitoring of laser powder bed fusion process on variable time-scales using heterogeneous sensing and operando X-ray radiography guidance
Additive Manufacturing. 2022; 58: 103007 (15 pp.). https://doi.org/10.1016/j.addma.2022.103007
DORA PSI
Pauzon C, Van Petegem S, Hryha E, Chang CST, Hocine S, Van Swygenhoven H, et al.
Effect of helium as process gas on laser powder bed fusion of Ti-6Al-4V studied with operando diffraction and radiography
European Journal of Materials. 2022; 2(1): 422-435. https://doi.org/10.1080/26889277.2022.2081622
DORA PSI
Glerum JA, Hocine S, Chang CST, Kenel C, Van Petegem S, Casati N, et al.
Operando X-ray diffraction study of thermal and phase evolution during laser powder bed fusion of Al-Sc-Zr elemental powder blends
Additive Manufacturing. 2022; 55: 102806 (12 pp.). https://doi.org/10.1016/j.addma.2022.102806
DORA PSI
Pfeiffer S, Florio K, Makowska M, Marone F, Yüzbasi S, Aneziris CG, et al.
Crack-reduced alumina/aluminum titanate composites additive manufactured by laser powder bed fusion of black TiO_2-x doped alumina granules
Journal of the European Ceramic Society. 2022; 42(8): 3515-3529. https://doi.org/10.1016/j.jeurceramsoc.2022.02.046
DORA PSI
Polatidis E, Shukla S, Čapek J, Van Petegem S, Casati N, Mishra RS
Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction
Materials Today Communications. 2022; 30: 103155 (9 pp.). https://doi.org/10.1016/j.mtcomm.2022.103155
DORA PSI
Ghasemi-Tabasi H, de Formanoir C, Van Petegem S, Jhabvala J, Hocine S, Boillat E, et al.
Direct observation of crack formation mechanisms with operando laser powder bed fusion X-ray imaging
Additive Manufacturing. 2022; 51: 102619 (11 pp.). https://doi.org/10.1016/j.addma.2022.102619
DORA PSI
Ghasemi-Tabasi H, Larcher MND, Cayron C, Jhabvala J, Van Petegem S, Kalentics N, et al.
Understanding variant selection and texture in additively manufactured red-gold alloys
Scripta Materialia. 2022; 211: 114490 (7 pp.). https://doi.org/10.1016/j.scriptamat.2021.114490
DORA PSI
Verezhak M, Van Petegem S, Rodriguez-Fernandez A, Godard P, Wakonig K, Karpov D, et al.
X-ray ptychographic topography: a robust nondestructive tool for strain imaging
Physical Review B. 2021; 103(14): 144107 (9 pp.). https://doi.org/10.1103/PhysRevB.103.144107
DORA PSI
Polatidis E, Haidemenopoulos GN, Krizan D, Aravas N, Panzner T, Šmíd M, et al.
The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: experimental investigation and modelling the transformation kinetics
Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2021; 800: 140321 (10 pp.). https://doi.org/10.1016/j.msea.2020.140321
DORA PSI
Sohrabi N, Jhabvala J, Kurtuldu G, Stoica M, Parrilli A, Berns S, et al.
Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion
Materials and Design. 2020; 199: 109400 (14 pp.). https://doi.org/10.1016/j.matdes.2020.109400
DORA PSI