Info message
Dieser Inhalt ist nicht auf Deutsch verfügbar.MicroXAS - Station1
Figure 1: micro-Endstation
Figure 2: micro-Endstation
Microfocusing (KB-Box)
80mm after the KB Box (fine-focusing of the x-ray-beam) there is the focal spot.
Fluorescence scan of 20um thick Cu-structure (5um solid, 7,5um hole). 1um reslution.: 100x100um (~16min)
Fluorescence scan of 20um thick Cu-structure (5um solid, 7,5um hole). 1um reslution.:50x50um (~8min)
Sample Manipulator and Heavy Sample Manipulator
They consist of a base module, Z-rotation-X-Y. On top several modules can be attached.
Following we provide, pictures, models and drawings. Some models are in edrawings format, which you can download and open on your Windows PC, without any additional software! You even can measure distances.
We also can provide 3D CAD models of nearly the whole end-station if this is needed for you to fit it your experimental setup.
If you like to mount your own sample holder, this is possible, consider the interface. Scan-Y (vertical axis)
Please be aware the the vertical axis can only carray <= 5kg load. (centered, without too much momentum)
Download eDrawings model (Windows only)
Following we provide, pictures, models and drawings. Some models are in edrawings format, which you can download and open on your Windows PC, without any additional software! You even can measure distances.
We also can provide 3D CAD models of nearly the whole end-station if this is needed for you to fit it your experimental setup.
Sample Manipulator
There is 154mm from the top of the basis-module to the beam.If you like to mount your own sample holder, this is possible, consider the interface. Scan-Y (vertical axis)
Please be aware the the vertical axis can only carray <= 5kg load. (centered, without too much momentum)
Download eDrawings model (Windows only)
Sample Manipulator
Drawing / Model
Heavy Sample Manipulator
Here are 210mm from the top of the basis-module to the beam.Download eDrawings model (Windows only)
If you like to mount your own sample holder, this is possible, consider this interface: Scan-Y (vertical axis) can take up to 10kg load. Download2D drawing. (ZA13A-W2 earlier ZA13-03)
Heavy Sample Manipulator
Drawing
Sample Manipulator Top Modules
| Sample Manipulator Top Modules | ||
|---|---|---|
| Swivel | Heavy Swivel | Rotation |
 Kohzu SA05B-RL View 2D Drawing |  Kohzu SA10A-RL including encoders. View 2D Drawing |  Kohzu RA07A-W View 2D Drawing |
| XY-table | Adapter 45-Deg | XY-table |
 Kohzu YM07A-S1, modified with piezomotors. Resolution 30nm Encoders 50nm Motion-Range 1-5mm can be mounted on the rotation stage. View 2D Drawing |  different 6mm thick adapters to mount top modules in 45-deg. |  small piezo driven XY-table. Can only carry much below 1kg load. |
| Sample Holder | ||
 Download eDrawings model (Windows only) | ||
