SwissFEL PlakatBAU web-neu VM16.jpg

The New Highlight in Switzerland's Research Infrastructures

Welcome to the Website of the SwissFEL, Switzerland's X-ray free-electron laser at the Paul Scherrer Institute.

The SwissFEL is based on a novel technology holding exceptional promises for diverse areas of scientific research. Serving our society's modern trends "smaller, faster, more complex", SwissFEL will provide unprecedented insights into structures as small as an atom and into phenomena as fast as the vibrations of molecular bonds. It will also reveal the secrets behind the inner complexity of technologically relevant materials

First serial femtosecond crystallography (SFX) pilot user experiment at SwissFEL

12. August 2018

Nass August 2018.jpg
On the 7th to 12th of August 2018, a collaborative group of scientists from the Paul Scherrer Institute and members of the LeadXpro and Heptares pharmaceutical companies led by Karol Nass (PSI macromolecular crystallography MX-SLS group) performed the first serial femtosecond crystallography (SFX) pilot user experiment at the Swiss X-ray free electron laser SwissFEL (read more).

Scientific Highlights

18 September 2018


Bernina status first summer shutdown

The summer shutdown was used to install more missing hardware. With the new components the Bernina instrument will be already very close to the full design capabilities when the exciting time of user experiments will begin in 2019.

20 June 2018

teaser picture

Movie directors with extra roles

SwissFEL Storage Large Research Facilities

Data storage devices based on novel materials are expected to make it possible to record information in a smaller space, at higher speed, and with greater energy efficiency than ever before. Movies shot with the X-ray laser show what happens inside potential new storage media, as well as how the processes by which the material switches between two states can be optimised.

6 April 2018


A first glance at the SwissFEL x-rays wave-front

X-ray Free Electron Lasers (XFELs) combine the properties of synchrotron radiation (short wavelengths) and laser radiation (high lateral coherence, ultrashort pulse durations). These outstanding machines allow to study ultra-fast phenomena at an atomic level with unprecedented temporal resolution for answering the most intriguing open questions in biology, chemistry and physics.

30 November 2017

1stpilot 30112017.jpg

First time resolved Pilot Experiment by SwissFEL: Semiconductor to metal transition in Ti3O5 nanocrystals

On the 30th of November 2017 SwissFEL saw its first time resolved pilot experiment in the Bernina experimental station of the SwissFEL ARAMIS beamline. A team of scientists from the University of Rennes, ESRF and PSI, led by Marco Cammarata (Univ. Rennes) and Henrik Lemke (PSI), successfully started the experimental phase at SwissFEL. The goal was to study the picosecond dynamics of a light-induced phase transition from a semiconductor to metallic crystal structure in a Titanium Oxide (D). In nanoparticles, the transition occurs reversibly and may be interesting for data storage applications. The transition was studied by powder X-ray diffraction using the 3rd Harmonic 6.6 KeV Photons (~1% of fundamental @ 2.2 KeV 220 μJ) of SwissFEL (A: Diffraction image, 100 pulse average ). After excitation with infrared laser light (800nm, 42 mJ/cm2), changes in the Debye-Scherrer diffraction rings indicate the transient population changes in the different phases (B). A cascade of dynamic processes from few picosecond acoustic lattice deformation to phase transition from ~10 picosecond to microsecond timescale could be observed (B/C). Once fully analyzed the scientists hope to fully describe the time scale and mechanisms of the photo transformation.

15 June 2017


Nonlinear electron-phonon coupling in doped manganites

We employ time-resolved resonant x-ray diffraction to study the insulator-to-metal transition that is launched via resonant excitation of an infrared-active optical phonon mode in a half doped manganite. We find that the charge order reduces promptly with a highly nonlinear (quartic) dependence on excitation fluence.

First Pilot Experiment at SwissFEL-Alvra: UV photo-induced charge transfer in OLED system

17. December 2017

ALVRA pilot.jpg
On the 17th of December 2017 SwissFEL saw its first pilot experiment in the Alvra experimental station of the SwissFEL ARAMIS beamline. A team of scientists from the University of Bremen, Krakow and PSI, led by Matthias Vogt (Univ. Bremen) and Chris Milne (PSI), in collaboration with J. Szlachetko, J. Czapla-Masztafiak, W. M. Kwiatek (Inst. of Nucl.Phys. PAN (Krakow)), successfully did the first pilot experiment at SwissFEL-Alvra on UV photo-induced charge transfer in OLED system (read more).

First time resolved Pilot Experiment by SwissFEL: Semiconductor to metal transition in Ti3O5 nanocrystals

30. November 2017

1stpilot 30112017.jpg
On the 30th of November 2017 SwissFEL saw its first time resolved pilot experiment in the Bernina experimental station of the SwissFEL ARAMIS beamline. A team of scientists from the University of Rennes, ESRF and PSI, led by Marco Cammarata (Univ. Rennes) and Henrik Lemke (PSI), successfully started the experimental phase at SwissFEL (read more).

How ‘super-microscopes’ are changing the face of European science

13. November 2017

13 November 2017 – Brussels – 16 organisations representing 19 light sources facilities across Europe gathered to launch the LEAPS initiative and signed an agreement to strengthen their collaboration, in the presence of Robert-Jan Smits, Director General for Research and Innovation (RTD) at the European Commission, and Giorgio Rossi, Chair of the European Strategy Forum on Research Infrastructures (ESFRI). LEAPS, the League of European Accelerator-based Photon Sources, aims to offer a step change in European cooperation, through a common vision of enabling scientific excellence solving global challenges, and boosting European competitiveness and integration. This will be achieved through a common sustainable strategy developed in coordination with all stakeholders, including national policy makers, user communities and the European Commission (read more).

First light in SwissFEL Experimental Station Bernina

20. October 2017

20171030 First Light Bernina.JPG
Friday, October 20th, 2017, we brought the first light (wavelength 1.2 nm) into the experimental hutch of Bernina. The beam passed the Alvra endstation, went through the diagnostic devices and hit the diagnostic screen in front of the refocussing KB-system of Bernina. The upper picture shows the pink beam on the last diagnostic screen of the beamline. The lower left at the entrance of Bernina-hutch, 133 m downstream of the undulator. The lower right picture shows the beam centered in the alignment iris in front of the KB-system.

ATHOS Conceptual Design Report (CDR)

11. September 2017

Athos CDR 2017.JPG
Cover Athos DCR Report
The ATHOS Conceptual Design Report has recently been completed and describes the ATHOS project in detail. The CDR starts with a summary of the characteristics of the ATHOS undulator line. Especially the design parameters of the different ATHOS operation modes are explained and illustrated by simulation results. The core part of the report is a description of all key components, i.e. from the electron bunch extraction kicker down to the ATHOS experimental stations.

Download the full report Athos CDR .

First beam in optics hutch

31. August 2017

20170906 Follath 1.jpg
On August 31st, 2017, SwissFEL reached the next milestone by sending the first X-rays into the Optics Hutch. The Aramis undulators of SwissFEL produced SASE-radiation with 1.2 nm wavelength. The beam entered the Aramis-beamline along the pink beam path of Bernina via two vertical offset mirrors and was detected on the diagnostic photon screen at the end of the Optics Hutch. A stable and well shaped beam with a diameter of 1.5 mm was observed. With the bendable offset mirrors we were able to manipulate the profile to enlarge and reduce the vertical its size from 660 µm (rms) down to 260 µm (rms) without introducing distortions. The gas based intensity and position monitor in the frontend could be calibrated and determined a pulse energy of approximately 5 µJ. We are now looking forward to the next commissioning time in October to commission the monochromatic beam path of Bernina and the second branchline Alvra.

Scientists Get First Direct Look at How Electrons ‘Dance’ with Vibrating Atoms

7. July 2017

Gerber Lemke teaserbild.jpg
Research experience from California's X-ray free-electron laser benefits SwissFEL. It's the camera that allows researchers to make extremely rapid processes visible: the X-ray free-electron laser. Currently, however, only three sites worldwide—in the US, Japan and South Korea—have facilities capable of carrying out such measurements. Two current articles in Science and Nature Communications co-authored by researchers now at the Paul Scherrer Institute PSI exemplify the kind of outstanding scientific work that can be carried out at such facilities, enabling new insights into the mechanisms of superconductors and magnetic switching in molecules. The measurements were conducted at the Linac Coherent Light Source (LCLS) free-electron laser in California. Press release PSI / Press release SLAC

Observing switching of Molecules using Free Electron Lasers

24. May 2017

Lemke 2017.jpg
Free electron lasers (FELs) like SwissFEL help scientists to understand the mechanisms that switch properties of materials which are the basis for functions in electronics, solar cells, chemistry and biology. By using ultrashort X-ray pulses it becomes possible to visualize the ultrafast rearrangements of electrons and atoms that enable the properties to switch in molecules or crystals. An international consortium of researchers lead by Paul Scherrer Institute, Université de Rennes, and SLAC National Laboratory has now visualized the entire cascade of processes that lead to a change of the magnetic moment of electrons in a molecule within one trillionth of a second (10-12 s = 1 picosecond), using the FEL at Stanford, California (LCLS). Read more

SwissFEL: First lasing at a wavelength of 4.1 nm

15. May 2017

Lasing 4.1nm.png
The electron beam energy of SwissFEL was recently increased to above 900 MeV by successfully bringing two new accelerating modules into operation. This allowed SwissFEL to produce laser radiation for the first time in the soft x-ray regime with a photon wavelength of 4.1 nm. During the next months, the electron beam energy will be progressively further increased with the goal of enabling first user experiments at a wavelength of around 0.5 nm towards the end of this year.

Extreme optical and electronic nonlinearities in GaP induced by an ultrastrong Terahertz field

22. February 2017

20160306 Hauri.jpg
Researchers from the SwissFEL laser group have succeeded in using intense Terahertz radiation to dramatically change the optical properties of a semiconductor on a sub-cycle timescale. In their experiment the material Gallium Phosphide (GaP) was illuminated by an extremely strong THz electric field with up to 50 MV/cm in strength. Read more

SwissFEL Inauguration

5. December 2016

20161205 SwissFEL Einweihung 0664.jpg
On the 5th of December 2016, the Paul Scherrer Institut PSI inaugurated its new Research Infrastructure SwissFEL, in the presence of the President of the Swiss Confederation, Johann N. Schneider-Ammann. The scientific break troughs expected with the Swiss hard X-ray Free Electron Laser will push new developements in energy- and environmental research as well in the areas of information technology and health research.Read more

SwissFEL First Lasing

2. December 2016

On Friday December 2nd at 1am SwissFEL observed for the first time FEL lasing in the undulator line.Read more

EUCALL finishes first year, bearing new technologies

1. November 2016

20161101 mvd.jpg
The European Cluster of Advanced Laser Light sources (EUCALL), a European Union-funded project that aims to foster links between accelerator- and laser-driven X-ray facilities, has completed the first year of its three year project period. The project successfully met all twenty of its milestones for the year, producing a new open-source tool for experiment simulations and developing specifications for several pieces of new scientific equipment.Read more

21. October 2016

20161021 Nass.jpg
JUNGFRAU is a charge-integrating, two-dimensional pixel detector developed at the Paul Scherrer Institut for use at free-electron lasers, in particular SwissFEL, and synchrotron light sources. On the 10th October, the first protein crystallography experiment using the JUNGFRAU detector, was performed at the beamline X06SA (PXI) of the Swiss Light Source by the members of the Protein Crystallography and Detectors groups at PSI.Read more

Completion of the vacuum pipes assembly from injector to front end

10. October 2016

20161010 Highlight Romain.jpg
On Monday October the 10th the last piece of vacuum tube was mounted and pumped down. The about 500 m long vacuum chamber from the end of the injector to the photonics front end is now under vacuum.Read more

Last undulator placed in SwissFEL tunnel

6. October 2016

Ganter Undulatoren.jpg
On the 6th of October the last undulator for the ARAMIS beamline was placed into the SwissFEL tunnel.Read more

Completion of SwissFEL LINAC

13. September 2016

PSI SwissFEL 2016 Pic265.jpg
On September 13th, the last two modules of the linear accelerator were installed in the SwissFEL tunnel. This means that 26 accelerating modules are installed now. One accelerating module consists of four accelerating structures. In total there are 104 accelerating structures, with a lenght of 2 m each.Read more

First acceleration with SwissFEL C-band modules

9. September 2016

screenshot 2959 1.gif
For the first time electrons were accelerated with a SwissFEL C-band module (the first one of a series of 26 modules). The module operated with the nominal parameters that will be used in the last two linac sections. The RF pulse duration was 3 µs, at an RF power of 36 MW from the klystron. This pulse was compressed to 350 ns, yielding a peak power of approximately 215 MW. At these conditions, the energy gain was estimated to be 235 MeV, which is well within expectations.

First SwissFEL Beam at 144 MeV

8. September 2016

PSI SwissFEL 2016 Pic129.jpg
For the first time electrons were transported and accelerated in the SwissFEL injector beamline. At an estimated final beam energy of 144 MeV the shift crew managed to propagate the beam up to the injector beamdump at a distance of 120 m from the electron source. For this first transmission the electrons were accelerated by the RF gun and two S-band accelerating structures.

First Free Electrons at SwissFEL

24. August 2016

firstelectrons small.jpg
At SwissFEL the first free electrons were produced and accelerated to 7.9 MeV. The electrons were stopped directly after the gun in the gun-spectrometer. The bunch charge was 20-50pC, with a repition rate of 10Hz. First measurements showed that the generated electron beam was of high quality. This means that the first milestone for the SwissFEL beam commissioning was reached! Read more

Catching proteins in the act

22. August 2016

20160823 standfuss.jpg
An international team under the leadership of the PSI has now successfully shown how the ultrafast processes by which proteins do their work can be studied with free-electron X-ray lasers. As a model organism, they used a simple microbe that can convert light into chemical energy. The researchers report their results in the scientific journal Nature Communications. Read more

Investigating DNA Radiation Damage Using X-Ray Absorption Spectroscopy.

6. June 2016

JoannaHighlight 2016.jpg
The key to achieving more effective radioprotection and radiotherapy is to understand the exact mechanism of the interaction between radiation and biomolecules, and in particular to obtain the precise structure of the different forms of damage and their relative ratios. Among all biomolecules exposed to radiation, DNA plays an important role because any damage to its molecular structure can affect the whole cell and may lead to chromosomal rearrangements resulting in genomic instability or cell death Read more

Tailoring Novel Superconductivity

14. April 2016

20160414 Radovic.jpg
The band insulator strontium titanate SrTiO3 (STO), widely used as a substrate for growing oxide films, is a highly fascinating material. Recently, novel physical properties have been observed at the interface between STO and the materials grown on it. For instance the appearance of superconductivity above the temperature of liquid nitrogen, observed in a single monolayer of FeSe (its critical temperature is higher than in any iron-based bulk material) grown on the STO surface, suggests a key-role of the STO substrate. Read more

Hard X-ray Photon Single-Shot Spectrometer of SwissFEL successfully delivered and installed

1. April 2016

20140401 2 Rehanek.jpg
Not a joke: on 1st of April 2016 the Photon Single-Shot Spectrometer (PSSS) got delivered fully assembled and installed already to the front end of SwissFEL. It will measure the photon spectral information in every single shot for the Aramis beamline not only for the users, but also as a direct feedback to the machine during formation of the lasing process. Read more

Towards hybrid pixel detectors for energy-dispersive or soft X-ray photon science

16. March 2016

Highlight Detector.jpg
JUNGFRAU (adJUstiNg Gain detector FoR the SwissFEL Aramis User station) is a two dimensional hybrid pixel detector for photon science applications at free electron lasers and synchrotron light sources. The JUNGFRAU 0.4 prototype presented here is specifically geared towards low-noise performance and hence soft X-ray detection. With an extremely low noise of less than 30 electrons it enters a field formally reserved for SSD’s and CMOS imagers allowing single photon resolution down to a photon energy of 500eV. Read more

Installation progress of the SwissFEL Linac

9. February 2016

20160209 Florian Linac.jpg
The installation of the linear accelerator (Linac) progresses very well. This week, the last girder of the so-called “Linac 1” was installed in the SwissFEL tunnel. The entire C-band accelerator consists out of Linac 1, Linac 2, and Linac 3, and a total amount of 104 accelerating structures. Meanwhile, 38 accelerating structures are installed in the SwissFEL tunnel. The assembly work on the remaining Linac modules will take place until end of September of this year. By then it is planned to finish the installation of all Linac modules in the SwissFEL tunnel. Read more

Transport of first "completed" Undulator into the SwissFEL Tunnel

25. January 2016

Undulator highlight1.jpg
On the 25th of January, the first "completed" undulator has been transported to its final position in the SwissFEL tunnel. The 1064 permanent magnets of this undulator where shimmed to the sub-micrometer level and the magnetic profile has been carefully measured for the full gap range. Twelve of such undulators will be installed until October 2016! Read more

First ultraprecise mirror for SwissFEL arrived at PSI

5. January 2016

Spiegel Rolf.jpg
Mirrors are key elements to distribute and shape the Xray beam generated by the undulators of the SwissFEL facility. They are essential tools to guide and Focus the light according to the specific users requirements and should do this without noticeable effects on the beam quality. A quantitative measure is the quality of the beam wavefront. Read more

5. November 2015

20151105 EUcalllogo.jpg

New EU project: Guiding light for the world’s brightest light sources

EUCALL will build bridges between major laser and X-ray research centres: For the past half-century, two special kinds of light have changed the landscape of research. Advanced visible-spectrum optical lasers have propelled studies into ultrafast processes, new materials, telecommunications, and many other fields, while intense X-rays produced at synchrotrons have helped image tiny structures and otherwise invisible parts of matter, enabling huge leaps in biochemistry, pharmacology, and materials science. New developments have enhanced the generation of X-rays at optical-laser and accelerator facilities, resulting in the creation of large international research centres. The European Union is now funding a 7 million-euro effort to bring these research centres together through the European Cluster of Advanced Laser Light Sources (EUCALL) project. Read more

26. October 2015

20150915 Teraherz Licht 0020.jpg

Put in perspective

Researchers from the Paul Scherrer Institute PSI have succeeded in using commercially available camera technology to visualise terahertz light. In doing so, they are enabling a low-cost alternative to the procedure available to date, whilst simultaneously increasing the comparative image resolution by a factor of 25. The special properties of terahertz light make it potentially advantageous for many applications, from safety technology to medical diagnostics. It is also an important tool for research. At PSI, it will be used for the experiments on the X-ray free-electron laser SwissFEL. The terahertz laser developed at PSI is currently the world’s most intensive source of terahertz light. Read more

12. October 2015

Prat 20151106.png

New methods to generate short and high-power X-ray Free-Electron-Laser pulses

State-of-the-art X-ray Free-Electron-Laser (XFEL) facilities like SwissFEL are able to provide radiation pulses with pulse powers of a few tens of gigawatts and pulse durations of several tens of femtoseconds and shorter. There is, however, a strong demand in research fields such as bioimaging and nonlinear optics to obtain higher radiation powers and shorter pulses than in standard facilities. In this context, we have developed two new methods able to generate terawatt-attosecond XFEL pulses. Both proposals are based on superradiance, a regime with quadratic growth of the radiation power and a shortening of the spike while it slips into unspoiled (good-beam) regions of the bunch. Read more

22. September 2015

21051110 Divall.png

Laser arrival time measurement and correction for the SwissFEL lasers

To probe ultrafast processes at SwissFEL it is crucial that the pump laser, used at the end stations, arrives in time with the generated X-ray pulses. For fs resolution pump probe experiments a path-length change of few-hundred nanometers already affects the measurement quality. The length of SwissFEL and the total propagation path of the pump laser light to the experiment is in the scale of several hundred meters, which makes this task challenging. Read more

24. August 2015

20151110 Umbrella highlight.jpg

Umbrella MoU Signed by 14 Parties

The Memorandum of Understanding of the Umbrella Collaboration was signed by 14 parties: ALBA, DESY, Diamond Light Source Ltd, Elettra, EMBL Heidelberg, ESRF, European XFEL, HZB, ILL, Instruct Academic Services Ltd, KIT, PSI, STFC and SOLEIL. Read more

17. August 2015

20151110 Hauri.jpg

Terahertz laser light focused to the extreme

There are limits to how short a flash of light can be – in both time and space. Researchers from the Paul Scherrer Institute (PSI) have now succeeded in reaching these physical limits and producing the smallest possible flash. Read more

10. July 2015

Pradervand 20151007.png

High-Precision Vertical Linear Translation for Offset Mirrors

The horizontal and vertical offset mirrors are key optical elements for the SwissFEL ARAMIS Beamline. The offset mirrors for example, are used to deflect and steer the x-ray beam into one of the end stations. Read more

8. June 2015

Highlight Gasmonitor small.jpg

PSI-DESY Collaboration Delivers First Photonics Component for SwissFEL

The Photon Beam Intensity Gas (PBIG) monitor arrived at PSI at the end of May, and will be one of the first photonics components to be installed in the new SwissFEL facility. Read more

19. May 2015

20150519 Beam Stopper.jpg

Beam Stoppers for SwissFEL

On the 5th of May the two beam stoppers were installed in the SwissFEL tunnel. These two blocks are made out of copper, recycled lead, steel and concrete blocks and weight 60 tons each. These stoppers are placed in front of both Aramis and Athos undulator lines. Read more

19. March 2015

Highlight Hauri small.jpg

Table-top soft x-ray lasers based on high-order harmonic generation (HHG)

Table-top soft x-ray lasers based on high-order harmonic generation (HHG) deliver routinely linearly polarized light. Many advanced applications including magnetic imaging would profit from a HHG source delivering in addition circular polarized light. In one of our recent work we present now an approach which provides intense soft x-ray radiation of high ellipticity. This source has given us the opportunity to realize the first magnetic dichroism experiment on a nickel sample at 18 nm (67 eV) with a table-top HHG source.Read more

17. February 2015

Gerhard Paul small.jpg

Prospective studies for SwissFEL experiments done at the SLS FEMTO station

L. Rettig et al, Phys. Rev. Lett. 114, 067402 – Published 13 February 2015, DOI: PhysRevLett.114.067402 For many years, PSI researchers have been testing experimental methods that will provide insights into novel materials for electronic devices. Using a special trick to make the Swiss Light Source (SLS) at PSI generate light with similar properties to that of PSI's x-ray laser SwissFEL, the researchers were able to demonstrate that the experiments planned for SwissFEL are possible and they are now building an experimental station at SwissFEL. Read more

13. February 2015

C-band highlight small.jpg

Successful start of the series production of the C-band accelerating structures for SwissFEL

A total of 104 C-band accelerating structures will be needed for SwissFEL. Each of these structures is about 2 m long and consists out of 113 copper cells that are manufactured with micrometer precision using ultra-precision diamond machining, which results in mirror-like surfaces. The main components are the couplers at the input and the output of the structure, and the copper disks. For both, couplers and disks, the series production was successfully launched at the end of 2014. Since then the Dutch company VDL and TEL Mechatronics in Trübbach, Switzerland, delivered already many sets of couplers and accelerating disks, respectively.Read more

16. January 2015

Hauri highlight small.jpg

Terahertz wavefront control for extremely bright THz bullet

The brightness of a light source defines its applicability to nonlinear phenomena in science. The SwissFEL laser group has now overcome one of the two principal technological hurdles to produce bright pulses in the Terahertz range (0.1-5 THz). Read more

December 2014

Eduard Highlight small.jpg

Record low emittance for compressed bunches at the SwissFEL Injector Test Facility

The emittance of the electron beam is crucial for Free-Electron Laser (FEL) facilities: it has a strong influence on the lasing performance and on the total length of the accelerator. The emittance of the whole bunch, called projected emittance, is a general indicator of the electron beam quality. However, the key beam parameter for FELs is the slice emittance, i.e. the emittance measured for individual slices along the bunch length. In practice, both slice and projected emittance need to be optimized. A procedure to measure and minimize the projected and slice emittance was developed and implemented at the SwissFEL Injector Test Facility, a 250 MeV accelerator that was in operation between 2010 and 2014 to demonstrate the feasibility of the SwissFEL design. Read more

13. October 2014


SwissFEL Injector Test Facility: Summary of Experimental program achievements until decommissioning

The SwissFEL Injector Test Facility (SITF) at the Paul Scherrer Institute completed its four-year experimental program on October 13, 2014. Since its official inauguration in August 2010, the injector plant has fulfilled its purpose as a development facility for beam dynamics studies and a test bed for diagnostics developments, both in view of the realization of the SwissFEL. Read more

October 2014

Highlight-Beaud small.png

A time-dependent order parameter for ultrafast photoinduced phase transitions

The exploration of the interaction of structural and electronic degrees of freedom in strongly correlated electron systems on the femtosecond time scale is an emerging area of research. One goal of these studies is to advance our understanding of the underlying correlations, another to find ways to control the exciting properties of these materials on an ultrafast time scale. So far a general model is lacking that provides a quantitiative description of the correlations between the structural and electronic degrees of freedom.Read more

Pedrini Highliight small.png

7 Å resolution in protein two-dimensional-crystal X-ray diffraction at Linac Coherent Light Source

Membrane proteins arranged as two-dimensional (2D) crystals in the lipid environment provide close-to-physiological structural information, which is essential for understanding the molecular mechanisms of protein function. Previously, X-ray diffraction from individual 2D crystals did not represent a suitable investigation tool because of radiation damage.Read more

Benni small.png

Launch of the "SwissFEL in Virtual Reality" Model

On the 10.06.2014 the new SwissFEL in Virtual Reality Model was launched. The SwissFEL in a virtual reality model was realized with the help of the AGORA SNF funding project. SwissFEL in a virtual reality is a video game like device with whom SwissFEL researchers want to attract the general public, and especially groups usually less interested in research (i.e. people fancying videogames, entire families: parents in their thirties, with children between 8 and 15). The virtual model fosters communication of cutting edge research to the general public by explaining and guiding through the concept of Switzerland’s new cutting edge research facility through the new Virtual Reality Model in a playful way. Read more

igp 240 NewAndOldGunAndEnergy.jpg

First beam from the SwissFEL electron gun

6.06.2014 The new 3 GHz photocathode gun will provide the electron bunches for SwissFEL and has recently been installed in the SwissFEL injector test facility. There, it replaced the CTF2-gun 5, borrowed from CERN. The new gun is capable now of operation with 100Hz repetition frequency and a higher field on cathode and improved field symmetry.Read more

Hauri 20140612.png

Investigating ultrafast magnetization dynamics with a table-top femtosecond XUV laser

The study of ultrafast dynamics initiated by a femtosecond laser pulse is a hot topic. Many questions, such as the angular momentum transfer during the laser-matter interaction are yet unanswered which calls for advanced metrology. In order to investigate ultrafast transient dynamics in magnetic materials we have now implemented a new diagnostic scheme at our extreme UV high-harmonic (HHG) beamline which is based on the Transverse Magneto-Optic Kerr effect (T-MOKE). Read more

CRSIP 3rd annual meeting small.png

Large European R&D project holds its third annual meeting on the epn campus in Grenoble/France

Large research infrastructures are built on making the latest in technology for use in scientific experiments available to scientists. This often requires joint R&D efforts, and the CRISP project is bringing together eleven main players from across Europe to address four key technology areas for the big science of tomorrow. CRISP was launched in October 2011; the third annual meeting was the occasion to review the current status of the project, present some of the major accomplishments, and to coordinate the work for the last months of the project. Read more

Hauri 1.jpg

Coherent femtosecond radiation up to 300 eV

State of the art table-top high-order harmonic (HHG) sources driven by an intense femtosecond are routinely used to produce coherent soft x-ray pulses up to a photon energy of 100 eV. It is clear that many applications would benefit from higher photon energies, such as seeding a free electron laser, imaging of biological tissue in the water window (285 eV-530 eV) or the investigation of ultrafast magnetization dynamics in transition metals and rare earth elements with absorption edges in the range >100 eV. Motivated by such applications, the SwissFEL laser group has now extended the maximum photon energy from a table-top laser-driven source from 100 eV up to 300 eV (4 nm) Read more



The workshop of the PSI engineering department (AMI) recently completed the manufacturing of the high brightness electron source that will drive SwissFEL. The first characterization of the 2.5 cells RF photo cathode is in excellent agreement with the design values without applying a post-manufacturing tuning. Read more

Lasing small.jpg

First lasing at the SwissFEL Injector Testfacility

On the 15th of January 2014, first lasing was achieved in the SwissFEL injector test facility. This is a great success on the way towards SwissFEL, the future hard x-ray free-electron laser that is currently under construction at PSI. It proves the successful functioning of many key components together in a larger system as required for SwissFEL. Furthermore, this is the very first operation of a free-electron laser in Switzerland. Read more


Installation of SwissFEL Undulator Prototype in the Injector Test facility

On December 5th, the 17 tons SwissFEL undulator prototype (In-vacuum Undulator U15) has been successfully moved from the Undulator lab (SLS) to the SwissFEL Injector Test Facility (SITF). The commissioning of the U15 prototype with electron beam is an important step to validate the U15 design and also to detect possible improvements before full series production. Read more

PAM  highlight small.png

Photon Arrival and Length Monitor (PALM).

The accurate measurement of the time between a pump laser pulse and a FEL probe pulse is vital to the success of the future SwissFEL facility, which plans to use pump-probe science as a cornerstone of its activities. This measurement, along with the measurement of the time-profile of the FEL pulse, is the goal of the new device designed and tested by the Photonics group at SwissFEL called the Photon Arrival and Length Monitor (PALM). Using a technique called THz-streaking, the device looks at electrons photoionized by FEL radiation and accelerated by an oscillating THz field generated by a laser to determine when during the field’s oscillation the electron was generated from a gas. Read more

Error: (3) can't find Highlight_F._Löhl.jpg in LIVE_WWW/Swiss_Fel

52 MV/m in C-band structure

This summer, the first 2 m long C-band accelerating structure for SwissFEL was installed in the high power test stand at PSI. The goal was to verify that the accelerating structure can handle the high accelerating fields of around 28 MV/m that are needed for SwissFEL. At such high accelerating fields, sporadic break-downs are unavoidable, and a second goal was to confirm that the number of break downs is at a level that is acceptable for SwissFEL. Read more

Highlight Ch. Hauri.jpg

First beam: XUV laser meets Terahertz laser

Two new coherent photon sources, combined on a single laser table, have been built by the SwissFEL laser group and are operated successfully since several weeks by now. While the first type of laser delivers intense radiation in the Terahertz region at around 0.3 THz (i.e. 1 mm wavelength), the second laser source is a table-top, laser-driven XUV source based on high-order harmonic generation. It delivers photon energies up to 120 eV (i.e. 10 nm wavelength) in fully coherent XUV bursts of a few tens of femtosecond or even attosecond duration. Read more

Straightness small.jpg

First measurement campaign of the U15

The first measurement campaign of the U15 (the undulator prototype for the SwissFEL project) shows that electron trajectory straightness (measured with a dedicated Hall Probe bench) can be optimized beyond the micrometer level over the full operational range. Read more


Magnetisation controlled at picosecond intervals

A terahertz laser developed at the Paul Scherrer Institute makes it possible to control a material’s magnetisation at a timescale of picoseconds (0.000 000 000 001 seconds). In their experiment, the researchers shone extremely short light pulses from the laser onto a magnetic material, where the magnetic moments – “elementary magnets” – were all aligned in parallel. The light pulse’s magnetic field was able to deflect the magnetic moments from their idle state in such a way that they exactly followed the change of the laser’s magnetic field with only a minor delay. The researchers report on their results in the journal Nature Photonics. Read more

Grundstein 1.jpg

SwissFEL Milestone Party 3rd of July 2013

On the 3rd of July the SwissFEL Milestone Party took place, after the official foundation stone ceremony of PSIs new large scale facility. Around 250 guests defied the rain to see the revelation of the milestones at the SwissFEL construction site. Afterwards a nice dinner was offered in the OASE. The event was accompanied by a jazz quartet.

igp 1024x640  Figure Full MedienMitteilung e 4.jpg

X-ray Laser: A novel tool for structural studies of nano-particles

Development of analysis method for X-ray laser scattering data.

Prominent among the planned applications of X-ray free electron laser facilities, such as the future SwissFEL at the Paul Scherrer Institute, PSI, are structural studies of complex nano-particles, down to the scale of individual bio-molecules. A major challenge for such investigations is the mathematical reconstruction of the particle form from the measured scattering data. Read more

20130321 FIM4R participants small.gif

Federated Identity Management for Research Infrastructures FIM4R at PSI

On the 20th to the 21st of March 2013 the Federated Identity for Research Infrastructures FIM4R took place. This workshop in the fifth in a series, that started in summer 2011, to investigate Federated Identity Management for Research collaborations. For more information read here…

20130319 CRISP participants 0016-(2).gif

CRISP 2nd annual Meeting at PSI

On the 18th to the 20th of March 2013 the CRISP annual meeting was held at PSI. The meeting was a great success. The talks given by experts from different facilities gave an inspiring view of progress made within the different collaboration topics of the CRISP project read more... More than 100 participants from the different CRISP partner facilities participated at the meeting. We are grateful for the excellent contributions which were made.

Meuwly ngb-silver-dat.jpg

SwissFEL project approved by Swiss Parliament.

An important political milestone for the realization of the new SwissFEL facility was reached in December 2012, the Swiss Parliament approved the SwissFEL project. The legally valid building permit for SwissFEL arrived at the end of January 2013. Which means that the project can start! First works on the building site already initiated.

EuroFEL MoU small3.jpg

Establishment of European Free-Electron Laser Collaboration.

On the 31.05.2012 ten European research centres, including PSI agreed on a long-term close collaboration in the field of free-electron lasers and accelerator-based short-pulse sources. With combined efforts, the technologies and methods will be further developed and implemented for operation and use of these novel research facilities, thus creating a unique top level research infrastructure for science in Europe, offering optimal experimental conditions for a wide range of applications. Today, in the margins of the ERF workshop “Socio-economic Relevance of Research Infrastructures”, this collaboration agreement was signed at DESY by representatives of all institutes. Read more


Swiss-Swedish Partnership in Accelerator, Photon and Neutron Science.

The Paul Scherrer Institute (PSI) and the École Polytechnique Fédérale de Lausanne (EPFL) have signed an agreement with three leading Swedish research institutions covering technology development for the next generation of free-electron lasers and collaboration in photon and neutron science. The agreement promises a world of new research opportunities in materials, energy, environmental and life sciences. Read more


PSI-SwissFEL signs MoU with STFC on the 29th of November 2011.

With their signature, representatives of the PSI and the STFC, today, formalized the cooperation between the SwissFEL and STFC. The main focus will be on the establishment of a collaborative research effort to enable the exploitation and expansion of the scientific capabilities of the future SwissFEL project at PSI. Read more

2011-10 crisp logo.jpg

PSI-SwissFEL cooperates within the EU research network CRISP of eleven new European research infrastructures.

CRISP is a partnership which builds collaborations and creates long-term synergies between research infrastructures on the ESFRI (European Strategy Forum on Research Infrastructure) Roadmap in the field of physics, astronomy and analytical facilities to facilitate their implementation and enhance their efficiency and attractiveness. Read more

logo pandata.jpg

The PaNdata Open Data Infrastructure project (PaNdataODI) started in October 2011.

PSI-SwissFEL is part of PANdata ODI. PaNdata-ODI will develop, deploy and operate an Open Data Infrastructure across the participating facilities with user and data services which support the tracing of provenance of data, preservation, and scalability through parallel access. It will be instantiated through three virtual laboratories supporting powder diffraction, small angle scattering and tomography

SwissFEL Workshops image web 08072011.jpg

Workshops on hard X-Ray Instrumentation with the SwissFEL

The SwissFEL team of the Paul Scherrer Institute invites you to attend two workshops on hard X-ray instrumentation at the SwissFEL X-ray Free Electron Laser facility 12.9.11 and 21.11.11, at the University of Bern. more information here

Matthias 07042011-small.jpg

Nicolas Kurti European Science Prize for a SwissFEL Scientist

The Nicholas Kurti European Science Prize, sponsored by Oxford Instruments, is intended to recognise and promote outstanding achievements of young scientists in the field of physical sciences research and to support their career development. In 2011 this prestigious price was awarded to Prof. Dr. Mathias Kläui, head of the SwissFEL Nanoscale Spindynamics Group more information here

FEL Preis Sven.jpg

A prestigious FEL award for an outstanding scientist at the Paul Scherrer Institute

At the 32nd International Free Electron Laser Conference in Malmö, Sweden, the Prize Committee decided to award the prestigious 2010 FEL prize to Dr. Sven Reiche for “his outstanding contributions to the advancement of the field of Free-Electron Laser science and technology”. more information here


Lights on…. Inauguration of the SwissFEL Injector Test Facility

An important milestone for the realization of the new SwissFEL facility was reached on the 24th of August 2010, when the core of the new SwissFEL facility was set into operation at the Paul Scherrer Institute. Guest of Honour, Bundesrat Didier Burkhalter pressed the red button, and the SwissFEL Injector Test Facility produced its first electron beam. For more information see current news from PSI.

20130321 FIM4R participants small.gif

SwissFEL Injector Conceptual Design Report

The SwissFEL Injector Conceptual Design Report is completed and published in August 2010.
SwissFEL Injector CDR


SwissFEL Conceptual Design Report

The SwissFEL Conceptual Design Report is completed and published at the end of July 2010.

first beam screen.jpg

First Beam at SwissFEL Injector Test Facility

The technical development of the project has reached another milestone: In the SwissFEL injector test facility the first electron beam from the gun has been extracted and accelerated to 5 MeV on the 12th of March 2010.

Meuwly ngb-silver-dat.jpg

SwissFEL Included in Strategic Planning ETH Board

An important decision has been taken towards the realization of SwissFEL at PSI. The ETH Board has discussed PSI's proposal at its board meeting, beginning of March 2010, and has given unanimously its support by including the project in the strategic planning of the ETH Domain.

SwissFEL Sci Case.jpg

SwissFEL Science Case

Based on the SwissFEL science workshop series and with input from the PSI departments and international review committees, the science case has now been completed and published. The document is available as a PDF file.