News

The company Daetwyler made the undulators for the X-ray free-electron laser SwissFEL of the Paul Scherrer Institute PSI, to a precision of one-tenth of the width of a hair.

This year the first pilot experiments are starting at the X-ray free-electron laser SwissFEL. The X-ray light generated by SwissFEL will enable a broad spectrum of experiments. Beginning in 2020, a second beamline will provide for a still greater variety.

SwissFEL building, 24 August 2016: In the control room above the beam tunnel of the X-ray free-electron laser SwissFEL, the atmosphere is intense and focussed. Marco Pedrozzi’s team has big plans for this late August afternoon. The last adjustments have been made — it’s time to press the big button and start up the electron source. The goal: SwissFEL should generate its first electrons. A report.

With SwissFEL, a new landscape takes shapeBarely completed, the building housing the X-ray free-electron laser SwissFEL has disappeared again beneath a mound of earth. Since then, planting and landscaping have been under way on and around this major research facility of the Paul Scherrer Institute PSI. Its special location, in a forest, demands that SwissFEL be integrated in an environmentally appropriate way. So the facility is, from the outside, nearly invisible. And rare animals and plants have gained new living space.

Since the autumn of 2015, the SwissFEL beam tunnel has been filling up with the machine components for the new PSI large research facility. Piece by piece, the pre-assembled components are being brought to their final destination.

Interview with Luc PattheyLuc Patthey is in charge of designing and implementing the beamlines for the X-ray free-electron laser SwissFEL. In this Interview, he explains the requirements the beamlines need to meet for the X-ray light pulses generated by SwissFEL to reach the experiments in an optimal form and what role collaborations play in the development of beamlines.

Decoding biomolecules at SwissFEL and SLSProteins are a coveted but stubborn research object. A method developed for x-ray free-electron lasers and PSI’s future SwissFEL should now help researchers to make good headway in this field. It involves x-raying many small, identical protein samples consecutively at short intervals, thereby avoiding the main problem that protein research has faced thus far: producing samples in a sufficient size.

The first undulator frames have arrived at the SwissFEL building. They will take around six months to assemble, after which the finished undulators will be taken to the SwissFEL accelerator tunnel for installation.

Interview with Gabriel AeppliGabriel Aeppli has been head of synchrotron radiation and nanotechnology research at PSI since 2014. Previously, the Swiss-born scientist set up a leading research centre for nanotechnology in London. In this interview, Aeppli explains how the research approaches of the future can be implemented at PSI's large research facilities and talks about his view of Switzerland.

SwissFEL, PSI’s x-ray laser, is to render the individual steps of very rapid processes visible. A new method will facilitate especially precise experiments: the individual x-ray flashes are split into several parts that arrive at the object under examination one by one. The principle of the method harks back to the ideas of the earliest high-speed photography.

For many years, PSI researchers have been testing experimental methods that will provide insights into novel materials for electronic devices. Using a special trick to make the Swiss Light Source (SLS) at PSI generate light with similar properties to that of PSI’s x-ray laser SwissFEL, the researchers were able to demonstrate that the experiments planned for SwissFEL are possible and they are now building an experimental station at SwissFEL.

Researchers from PSI have spent the last four years developing key technologies for the X-ray laser SwissFEL and subjecting them to the acid test in the injector test facility. Now that the development programme has drawn to a close, the installation of the new large research facility is due to get underway in early 2015.

The building of the new PSI large research facility SwissFEL in Würenlingen forest could only enjoy the sunshine for a brief spell: it is now disappearing under a mound of earth. This superstructure is one of the measures taken to integrate the facility as harmoniously as possible into the natural environment.

Vergangenen Sonntag luden das Paul Scherrer Institut PSI und die Arbeitsgemeinschaft EquiFEL Suisse die Einwohnerinnen und Einwohner der Umgebung zum Tag der offenen SwissFEL-Baustelle ein. Rund 600 Interessierte informierten sich an mehreren Stationen über den aktuellen Bau- und Projektstand.This news release is only available in German.

For the electrons to reach the necessary energy level, their path in the linear accelerator needs to be absolutely straight. Even the slightest bend means a loss of energy, which the comparatively short SwissFEL linear accelerator cannot afford. Consequently, even the earth’s curvature needs to be balanced out while constructing the building, which not only requires state-of-the-art measurement technology, but also continuous monitoring.

In 2016, SwissFEL at the Paul Scherrer Institute PSI will go on-line. In the visitors` centre psi forum, the new large research facility can already be explored today. An interactive media table will accompany SwissFEL from the construction phase, through commissioning, up to regular operation.

Preventing SwissFEL electrons from going astrayCost-effective and with a minimal error rate àPSI-engineers from the power electronics section have set ambitious goals for the SwissFEL magnet power supplies.

The construction work in the woods is well underway: the building for SwissFEL, the Paul Scherrer Institute’s new large research facility, is due for completion by the end of 2014. The demands on the building are high: It needs to ensure that the sensitive equipment can run smoothly.

SwissFEL will create X-ray light with laser-like characteristics. The strong amplification of the light needed is produced by a process known as micro-bunching à electron packets break up in the undulator into thin layers which emit light in phase. At the same time, another process called seeding is being studied, in which one will be able to establish the properties of the light even more precisely.

X-ray light is produced in SwissFEL when electrons accelerated in its linear accelerator are forced to follow a wavy path. This takes place within the undulators à regular arrangements of magnets that bend the electron beam. The whole undulator section will be 60 metres long.

In the linear accelerator, the electron beam receives the kinetic energy it needs in order to generate X-ray light. The linear accelerator is, in total, more than 300 metres long and at its heart there are 11,752 specially shaped copper discs in which the accelerating field is created.

The electron beam for SwissFEL will be generated in an electron source. The demands of this component are very high: in order for the SwissFEL to be operated successfully, the electron beam must be of the highest quality from the very beginning.

At the PSI, the first accelerator structure has been completed for the linear accelerator of SwissFEL. A total of 104 of these structures are needed to accelerate the electrons to the required energy to produce the X-ray pulses in SwissFEL. The component manufactured using high-precision technology is currently undergoing high-performance testing.

The X-ray laser SwissFEL will provide researchers with novel experimental opportunities for gaining insights into a large variety of materials and processes. But, how do we identify which scientists will benefit most from the facility and in what way the facility should be configured to best meet their needs? Bruce Patterson, the SwissFEL’s idea-collector, explains how this search is done.

Durch die Bauarbeiten für den SwissFEL kommt es im Würenlinger Wald zu Sperrungen und Umleitungen. Alternativ-Routen für Velofahrer und Fussgänger werden angeboten.This news release is only available in German.

Construction work for SwissFEL has now started in the Würenlingen forest, and the building for this new Large Research Facility for the Paul Scherrer Institute PSI will be erected during the next year and a half.

Materials with special magnetic properties play an important role in modern technologies à for example, in the hard disc drives used to store data on a computer. Research at SwissFEL will help us to develop new magnetic materials, and to observe the fast processes in these materials as they happen. Thus, we will be able to see exactly what happens inside a hard disc when its data content is modified.

The completion of all required approvals gives a green light for the construction of SwissFEL, the new large research facility at the Paul Scherrer Institute PSI.

Experiments at SwissFEL will help us understand important processes in living organisms. They will reveal how vital biomolecules, whose structures cannot be determined using current techniques à are constructed. They will also reveal how the shapes of these molecules change. This knowledge will help us understand disease processes and to develop the drugs needed to treat them.

Inside the SwissFEL, electrons will be accelerated to almost the speed of light, then forced along a curved pathway by very powerful magnets, emitting X-ray light as they travel. SwissFEL is thus composed of an ‘electron gun’ (which generates the electron beam), an accelerator, and an undulator in which the electrons are guided along a wave-like path. An experimental area lies at the end of this track, where the light produced will be used to perform experiments.

SwissFEL will generate very short pulses of intense X-ray light with laser-like properties, and will therefore provide new insights into a wide variety of materials. The properties of this special "SwissFEL light" will broaden the scope of experiments that can be carried out at this facility.

Experiments at SwissFEL will help us understand in detail how one substance is transformed into another during a chemical reaction. Highest priority will be given to catalytic reactions, as these have numerous industrial applications. This research will point the way towards more energy-efficient industrial processes and environmentally-friendly energy carriers.

Am 3. September 2012 starten die Erschliessungsarbeiten zur neuen Grossforschungsanlage SwissFEL des Paul Scherrer Instituts. Mit ihnen wird die für den SwissFEL notwendige Anbindung an die vorhandene PSI-Infrastruktur hergestellt.This news release is only available in German.

Wer in den nächsten Monaten über den Oberen Priorhölzliweg spazierengeht und aufmerksam in den Wald späht, der kann sie entdecken: Das PSI reicht in der zweiten Juniwoche bei der Gemeinde Würenlingen offiziell das Baugesuch für seine neue Grossforschungsanlage SwissFEL ein und hat dafür - wie es für alle Baugesuche üblich ist à auch das zugehörige Baugespann aufstellen lassen.This news release is only available in German.